Yealink W52H - Page 40

User Guide W52P/W52H IP DECT Phone
28
To switch the input method:
1. Press .
The current input method is indicated in the top right-hand corner of the LCD screen.
For example, ―ABC‖ represents the upper-case input method, ―abc‖ represents the
lower-case input method and ―123‖ represents the digital input method.
To make a space:
1. Press when the input method is not ―123‖.
To move the cursor:
1. Press or to move the cursor.
To delete a wrong input character:
1. Place the cursor behind the wrong input character.
2. Press the <C soft key to delete the character.
You can add contacts to your local directory manually or from the call log.
To add a contact to the local directory manually:
1. Press to enter the main menu.
2. Select Directory.
3. Press the Options soft key, and select New Contact.
4. Enter the desired values in the Name, Office and Mobile fields.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To add a contact to the local directory from the call log:
1. Press the Call Log soft key when the handset is idle.
2. Press or to highlight the desired list, and press the OK key.
3. Press or to highlight the desired number.
4. Press the Options soft key, and select Add To Directory->New Entry.
5. Press or to set the desired number to be the office number or the mobile
number of the new entry, and press the OK soft key.
6. Enter the name of the new entry.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
If the information of the contact you want to add is totally same with that of an existing
entry in the local directory, the screen will prompt ―Contact save failed.‖.