Yealink W52H - Page 60

User Guide W52P/W52H IP DECT Phone
48
2. Select Voice Mail->Play Message.
The lines assigned to the handset as incoming lines and outgoing lines
simultaneously, and the number of voice mails of each line display on the LCD
screen.
3. Press or to highlight the desired line, and press the Select soft key.
The handset dials out the voice mail access code using the selected line
automatically.
4. Listen to the voice mail following the voice prompts from the system server.
To listen to the voice mail via fast access:
1. Long press when the handset is idle.
The handset automatically dials out the voice mail access code using the line you
selected when configuring fast access for voice mail.
2. Listen to the voice mail of this line following the voice prompts from the system
server.
You can also listen to the voice mail by pressing to enter into the Message&Call
interface. Select the desired line and press the Select soft key.
Note
Before listening to the voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the icon disappears from the screen.