Yealink W56P User Manual

User Guide for the W56P IP DECT Phone
86
3. Click Confirm to accept the change.
To configure the shared line settings on land-line IP phone via web user interface:
1. Register the alternate account 4603_1 on phone B.
(Enter the primary account 4603 in the Register Name field).
2. Click on Advanced, select Share Call Appearance from the pull-down list of Shared
Line.
3. Click Confirm to accept the change.
You can do the following using SCA feature by the handset:
 Placing an SCA call
 Answering calls
 Placing/Retrieving a call on hold
 Barging in an active call
To place a call on the shared line:
Do one of following:
- Enter the desired number using the keypad when the handset is idle.
Press , or to dial out.
If there are multiple lines assigned to your handset as outgoing lines, press the Line
soft key to select the shared line and then press or the Dial soft key to dial out. If
you do not select a line, the handset uses the default outgoing line to dial out.
- Press to enter the pre-dialing screen.
Enter the desired number using the keypad.
Press , or to dial out.
If there are multiple lines assigned to your handset as outgoing lines, press the Line
soft key to select the shared line and then press or the Dial soft key to dial out. If
you do not select a line, the handset uses the default outgoing line to dial out.
You can have one call or two calls on the shared line. When an incoming call arrives on
the shared line from User C, both DECT phone A and land-line phone B ring
simultaneously. The LCD screen of DECT phone A and land-line phone B display the
incoming call information.
You can answer the incoming call on either DECT phone A or land-line phone B but not

Yealink W56P Specifications

General

Lines quantity	5 lines
Answering machine	Yes
Phonebook capacity	500 entries
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Standby time	400 h
Headset connectivity	3.5 mm
Ethernet LAN (RJ-45) ports	1
Voice codecs	CNG, G.711, G.711a, G.722, G.723, G.726, G.727, G.729, VAD, iLBC
Number of melodies	9
Volume control	Digital
Keypad number of keys	12
Number of function keys	6
Mounting	Desk/Wall
Handset type	Wireless handset
Product type	IP Phone
Product color	Black, Silver
Maximum indoor range	50 m
Maximum outdoor range	300 m
Dual-Tone Multi-Frequency (DTMF) modes	-
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Security algorithms	AES, MD5, SIPS, SRTP, SSL/TLS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN interface type	Fast Ethernet
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Battery technology	Lithium

Weight and Dimensions

Weight	7800 g
Package depth	196 mm
Package width	203 mm
Package height	95 mm
Package weight	8700 g
Base dimensions	153.5 x 108.5 x 45 mm
Handset dimensions (WxDxH)	175 x 53 x 20.3 mm