EasyManua.ls Logo

Yealink W56P - Setting up the W56 P;W56 H Handset

Yealink W56P
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide for the W56P IP DECT Phone
6
To insert battery into the handset:
1. Open the battery cover.
2. Insert the battery and press it down.
3. Close the battery cover.
Note
The handset provides 2.4’’ 240x320 pixels color screen, and six changeable shortcut
keys. It also supports a standard 3.5mm earphone.
For the maintenance, read and follow as shown below:
1. Do not use the handset near sources of electric such as microwave oven, TV sets or
radios.
2. Keep the handset away from fire and moisture. Do not use the handset outdoors in
the rain or handle it with wet hands.
3. Clean it only with a soft cloth. Do not use excess water or cleaning solvents of any
kind.
4. Care should be taken that not to fall onto the floor.
5. Do not disassemble the handset.
We strongly recommend you use the same type rechargeable battery, or it may
damage the unit.
Voltage: 3.7V
Do not short-circuit the battery, as short-circuiting the terminals may damage the battery
or the handset.
Do not use a damaged battery, as this may cause an explosion.
Before replacing the battery, please turn off the handset to prevent memory loss.

Other manuals for Yealink W56P

Related product manuals