Yealink W56P - Setting up the Charger Cradle

Getting Started
7
Capacity: 1460mAh
The capacity of the battery depends on the use of backlight and talk time. The capacity
of the battery in the package is only approximately 40%. The first time to charge fully
will take about 3 hours.
Charging time: approximately 3.5~4 hours (fully discharged to full capacity).
Standby time: up to 400 hours when the backlight is disabled.
Talk time: up to 30 hours active talk time (with full charged battery).
The operating time of your handset depends on the capacity and age of the battery
and the way they are used.
To reduce the risk of dangerous or injury to persons, read and follow as shown below:

Keep the battery away from the heat sources and high voltages.

Please store them safely and stay in a half-charged state when the battery is not
used for a long time.

Don’t disassemble or assemble the battery by yourself.

Don’t heat and burn of the battery or throwing them in fire.

Don’t contact the leaking battery directly.
1. Connect the USB plug on the charger cradle to the DC5V port on the power
adapter.
2. Connect the power adapter into an electrical power outlet.