User Guide for the W56P IP DECT Phone
8
You can also mount the charger cradle on the wall, as shown below:
1. Drive the screws into the wall using the wall template as shown below.
2. Mount the charge cradle securely on the screws.
To charge the handset:
1. After setting up the handset and charger cradle, place the handset into the charger
cradle.
Note
The handset should be used with original power adapter (5V/600mA) only. The use of the
third-party power adapter may cause the damage to the handset.
To Next Page
Loading...
