User Guide for the W56P IP DECT Phone
22
If you do not press any key in a period of time, the LCD screen will automatically exit the
menu and return to the idle screen.
Note
You can enter and edit data in the corresponding field using the handset keypad.
The handset provides you with 12 different input modes. Keypad on the handset
provides different characters (or numbers) when using different input mode.
For more details on the input modes and character (or numbers) options for the keypad,
refer to Appendix C - Input Modes and Characters on page 98.
To configure the input mode via the handset:
The handset provides you with 12 different input modes. You can disable the
infrequently used input mode. Then you can only switch among the enabled input
modes when entering or editing.
1. Press to enter the main menu.
2. Select Settings->Display->Input Method.
The LCD screen displays all available input modes.
3. Press or to highlight the desired input mode.
4. Press the Change soft key to check or uncheck the checkbox.
There are limitations for certain types of the fields on handset as follow:
- Name and Password field: enter any characters that the handset provided.
- Number field: only enter the numeric characters, dot or #.
- IP Address field: only enter the IP address (numeric characters, dot and #).
In corresponding input mode, you can press the keypad repeatedly to view the
character (or numbers) options and press more times to highlight the desired character
(or numbers), the available character under each key appears on the bottom left-hand
When you are navigating the menu, the LCD screen will automatically exit the menu if an
incoming call arrives. The incoming call can be handled as usual. When the call is
terminated, the LCD screen will return to the idle screen.
To Next Page
Loading...
