Yealink W56P - Page 37

Basic Operations
23
corner of the LCD screen. Wait one second, and enter the next character (or numbers).
The default input methods are Abc, 123, ABC and abc.
To enter or edit data by the default input modes, do one of the following as shown
below:
If you want to
Then you can
Switch among input
modes
Press one or more times to switch
among input modes (depending on the input
mode you’ve configure, refer to Configuring
the Input Mode on page 22). The current input
mode is displayed on the bottom right-hand
corner of the LCD screen.
Enter only digits (1),
uppercase (A) characters
or lowercase (a)
characters.
Press a keypad key one or more times
(depending on what input mode you’re in) to
enter the characters that is displayed on the
keypad key.
For example, if the input mode is ABC:
- To enter “A”, press once.
- To enter “B”, press twice quickly.
- To enter “C”, press three times
quickly.
For other input modes, refer to Appendix C -
Input Modes and Characters on page 98.
Enter special characters.
Press to select the space character or
the following special character list: _’ ” = / \
^ ; : . , - + * # § % @ ? ! ¿ ¡ ( ) { } [ ] < > ¥ $ ￡ |
~ ¤
For Key:
- If it is in the uppercase (ABC soft key),
uppercase and lowercase (Abc soft key)
or lowercase (abc soft key) input modes,
it will provide space character and the
following special characters: . , ?, !, 0.
- If it is in the numeric (123 soft key) input
mode, it will only provide the digit 0.
- Long press the key to enter the character
+.
For other input modes, refer to Appendix C -
Input Modes and Characters on page 98.
Delete text you entered.
Press or to position the cursor to the
right of the text you want to delete, and then