Yealink W56P - Handset Registration

User Guide for the W56P IP DECT Phone
24
If you want to
Then you can
press the Del soft key to delete one character
at a time or long press to delete all characters.
You can register up to 5 handsets to one base station. Each handset can be registered
to 4 different base stations. You can select the desired base to use and rename it.
To register a handset manually:
1. Do one of the following:
- Long press on the base station till the Registration LED slow flashes green.
Press OK->Settings->Registration->Register Handset.
- If the handset LCD screen prompts “Press base page 2s then press OK”, long
press on the base station till the registration LED slow flashes green.
Press the OK soft key on the handset, select Registration->Register Handset.
The LCD screen displays the Base1 to Base4.
2. Press or to select the desired base, and then press the OK soft key on the
handset.
The handset begins to search for the base station.
3. Press the OK soft key when the LCD screen displays the RFPI code (e.g.,
02227C-0E534h) of the base station.
4. Enter the system PIN (default: 0000), and then press the Done soft key.
The handset LCD screen prompts “Handset Subscribed”, which indicates the
handset is registered successfully.
You can also enable the registration mode of the base station via web user interface at
the path Status->Handset&VoIP->Register New Handsets.
After initializing data successfully, an icon with internal handset number and handset
name appears on the LCD screen.
Note
To de-register a handset via the handset:
1. Press to enter the main menu.
2. Select Settings->Registration->De-reg. Handset.
3. Enter the system PIN (default: 0000), and then press the Done soft key.
The LCD screen displays the names of handsets registered to the same base station.
You cannot register multiple handsets simultaneously.
If the handset LCD screen prompts “Searching for Base”, please check your base
station if powered off.