Phone Settings
39
The pull-down list of Location displays the corresponding time zone names for the
time zone you selected.
If the selected location uses daylight saving time, the Start date, End date and
Offset(minutes) fields will be filled with time automatically. All of them are
read-only.
5. Click Confirm to save the change.
The phone will use the daylight saving time of the selected location.
Note
To configure the DST manually via web user interface:
1. Click on Settings->Time & Date.
2. Mark the Enabled radio box in the Daylight Saving Time field.
3. Do one of the following:
If the location you select does not use daylight saving time, the fields of Start Date, End
Date and Offset will be left blank.
To Next Page
Loading...
