Yealink W56P - Page 61

Phone Settings
47
To configure incoming/outgoing call lookup and update time interval via web user
interface:
1. Click on Directory->Remote Phone Book.
2. Select Enabled from the pull-down list of Incoming/Outgoing Call Lookup.
3. Enter the desired refresh period in the Update Time Interval(Seconds) field.
The default value is 21600 seconds.
4. Click Confirm to accept the change.
To access your remote phone book via the handset:
1. Press to enter the main menu.
2. Select Directory.
3. Press or to highlight the desired remote phone book, and then press the
Enter soft key.
The handset connects to the remote phone book and proceeds to load it. The
contacts in the remote phone book are displayed on the LCD screen.
To place a call from the remote phone book:
1. Press to enter the main menu.
2. Select Directory.
3. Press or to highlight the desired remote phone book, and then press the
Enter soft key.
The handset connects to the remote phone book and proceeds to load it. The
contacts in the remote phone book are displayed on the LCD screen.
4. Select the desired contact from the remote phone book.
5. Do one of the following:
- Press , if only one number is stored for the contact in the remote phone
book, the phone will dial out directly.
- Press , if both the office number and the mobile number are stored for the
contact in the remote phone book, the screen will display two numbers.