Yealink W56P - Answering Calls; Ending Calls

User Guide for the W56P IP DECT Phone
70
 Using the earphone
Note
Answering When Not in Another Call
In all cases, the active call will appear on the LCD screen showing call duration and
destination.
To answer a call using the earpiece:
1. Press or the Accept soft key.
To answer a call using the speaker:
1. Press .
To answer a call using the earphone:
1. With an earphone connected, press the Accept soft key.
Answering When in Another Call:
If you are during an active call, an incoming call arrives on the handset, do the
following:
1. Press to select the incoming call.
2. Press , , or the Accept soft key.
The incoming call is answered, and the original call is placed on hold.
To end an internal call:
1. Press the End soft key.
To end an external call:
Do one of the following:
- Press .
- Place the handset in the charger cradle.
The redial list stores the twenty last dialed phone numbers. When the memory of the
redial list is full, the handset will automatically erase the oldest dialed number when a
You can ignore an incoming call by pressing the Silence soft key or reject an incoming
call by pressing the on-hook key.
You can also activate Do Not Disturb mode on a per-line basis to reject all incoming calls
of the specified line. For more information, refer to Do Not Disturb (DND) on page 73.