MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 99
setting).
·Attended Transfer Timeout
The time out of transferring a call
·Blind Transfer
Users may blind transfer an incoming call by dialing*03 on their phone (*03 is
default setting).
·Call Pickup
Users may pick up an incoming call by dialing *4 on their phone (*4 is default
setting)
·Extension Pickup
Users may pick up a specific extension‟s incoming call by dialing *04+extension
number on their phone (*04 is default setting)
·Intercom
Define the feature code that is used to dial an extension in intercom mode. For
instance, setting this value to *5 would allow you to initiate an intercom call with
extension 501 by dialing *5501.
·Normal Spy
In this mode, you can only listen to the extension being spied, for example you
can dial *90501 to monitor extension 501
·Whisper Spy
In this mode you can listen/whisper to the extension being spied, for example,
dialing *91501 to listen to extension 501, you can also talk with 501 too.
·Barge Spy
In this mode, you can barge in both extensions involved in the call, for example
dialing *92501 to barge in and talk with extensions on both sides.
2) Call Park Preferences
·Call Parking
User may park an incoming call on his own telephone by pressing “*6” (*6 is
default setting)
·Extension range used to park calls
User may park an incoming call on a designated extension at first and then pick
up the call again on any other extension.
·Number of seconds a call can be parked before it is recalled.
Define the time (in seconds) that a call can be parked before it is recalled to the
To Next Page
Loading...
Need help?
General
