MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 166
APPENDIX J How to Enable Call
Recording on MyPBX U100/U200
MyPBX U100/U200 allows you to record the calls automatically. Here is the
guide for you to use it.
Note:
1. Before starting auto recording function, please make sure you have inserted
an USB device with the correct format.
2. If you need auto recording function for MyPBX U100/U200, please activate
the call recording function by entering a license key in WEB GUI.
1. Activate Call Recording
Note: For usage of call recording on U100/U200, please purchase activation
code from your equipment provider.
Call Recording enables all your inbound and outbound phone calls to be
recorded. The system would detect any call conversation and record them
automatically. The call recordings would be saved in the folder you specify and
stored in the USB.
And if users want to use the call recording feature, they need active this function
firstly.
Click to enter the “Addons” page.
Figure J-1
After activation, the page will show as below: