MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 130
10.2 Incoming call
Sample Routing to an IVR
Let‟s configure an incoming call to route to the IVR. In the IVR itself, let‟s
configure digit 0 to route the call to extension 300, and digit 1 to route the call
to ringgroup.
1. Add IVR
To add a new IVR, go to IVR Create New IVR
Figure 10-4
2. Add Inbound Routes
As we can see from the Inbound Route of “VOIP_IN”, all incoming calls from
VOIP trunk will be sent to the IVR.