MyPBX U100 & U200 Extension User’s Guide
Yeastar Technology Co., Ltd.（www.yeastar.com） 5/9
forwarded to if the called extension is unable to answer the call.
a. Transfer To choose voicemail, the incoming call will be forwarded to voicemail when there is no answer.
b. Transfer To choose Number, the incoming call will be forwarded to extension, PSTN or mobile phone
number when there is no answer.
Note: When saving the No Answer Follow Me configuration, the Ring Group and Call Queue services will be
disabled.
3. When Busy
When Busy Follow Me is a service of MyPBX that allows the automatic transfer of incoming calls to varying
other destinations when the called extension is busy with another call.
Enable Busy checkbox selection activates the busy call forwarding service on the current extension.
The Transfer To displayed the destinations where the incoming call from a particular caller should be
forwarded to when the called extension is busy.
a. Transfer To choose voicemail, the incoming call will be forwarded to voicemail when the callee is busy .
b. Transfer To choose Number, the incoming call will be forwarded to other extension, PSTN or mobile phone
number when the callee is busy.
Note: When saving the When Busy Follow Me configuration, the Ring Group and Call Queue services will be
disabled.
1.2.2 Call Waiting
Call Waiting is used to receive an incoming call when already on a call. A ringing tone will be heard by the
caller and a special beeping will be heard on the phone by the MyPBX user when the call arrives. To switch
between the current call and the new incoming call use the appropriate calling code.
Enable Call Waiting checkbox selection activates this service and makes it available for the phone's handset.
Note: If the Call Waiting service is enabled, the Busy Call Forwarding service would be disabled automatically.
1.2.3 Do not Disturb (DND)
Do Not Disturb service is used to turn off the phone bell. If it’s enabled, incoming callers will be routed to the
voicemail box (if enabled); otherwise they will be disconnected automatically.
1.2.4 Ring Out
Ring Out is used to define the ringing time of the extension. If the ringing time exceed the configured time,
the extension would stop ringing.
1.2.5 Mobility Extension Number
Mobility Extension Number is used to enable the cell phone to work as a mobile extension. If a cell phone
To Next Page
Loading...
Need help?
General
