MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 32
such as the call recording files and CDR files saved in disk. The configurations in
MyPBX will not be influenced by this feature. Two options are available: timing
synchronization and real-time synchronization.
5.3.7 AMI Settings
The Asterisk Manager Interface (AMI) is a system monitoring and management
interface provided by Asterisk. It allows live monitoring of events that occur in
the system, as well enabling you to request that Asterisk perform some action.
The actions that are available are wide-ranging and include things such as
returning status information and originating new calls. Many interesting
applications have been developed on top of Asterisk that take advantage of the
AMI as their primary interface to Asterisk.
There are two main types of messages on the Asterisk Manager Interface:
manager events and manager actions.
The 3
rd
party software can work with MyPBX using AMI interface. It is disabled
by default. If necessary, you can enable it.
Figure 5-20
Username & password: after enabling AMI, you can use this username and
password to log in MyPBX AMI
IP Restriction: you can set which IP can log in MyPBX AMI interface
5.3.8 Alert Settings
If the device is attacked, the system will notify users the alert via call or E-mail.
The attack modes include IP attack and Web Login.
More details for the system security configuration, please refer to APPENDIX I
MyPBX Security Configuration Guide.
To Next Page
Loading...
Need help?
General
