MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 120
·Country Code
The country code to be added before the dialed numbers.
·Receive mails every
The interval time of receiving mails from POP3 server.
·Access Code
This PIN code is used to verify the subject of the emails received. If the form of
email passes the verification, it will be send out by SIM card. If not, this email
will be deleted immediately.
3) Email Settings
Figure 6-77
Note:
1. If you want to use “SMS to Email”, please configure POP3 setting.
2. If you configure the POP3 setting, MyPBX will download emails from the mail
server regularly. Once downloaded, the emails will be deleted from the mail
server.
·Email Address
This email address will be used to:
1. Send email to the addresses listed on “SMS to Email” setting.
2. Receive email and send the text of the email to the target mobile number by
SMS.
Note: If you use Gmail, just put your user name here. E.g. email address:
test@gmail.com, you just put “test” here.
·Password
Input the password of this email here.
·SMTP Server (SMTP)
·SMTP Server Port
·Receive Server (POP3)
To Next Page
Loading...
Need help?
General
