Yeastar Technology MyPBX U100 User Manual

MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 136
Figure C-2 MyPBX Network setting
2. If MyPBX has a public IP, (i.e. is connected directly to your internet service
provider), the network settings should be configured according to Figure
C-3:
Figure C-3
Now, MyPBX has been configured as a public IP, so there is no need to
configure NAT again, just leave all settings in „NAT‟ blank.

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English