MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 50
Snom (300, 320, 360, 370)
Snom (300, 320, 360, 370)
Polycom (IP 6000, IP 7000, IP 32X, IP33X, IP430, IP450, IP550, IP560,
VVX1500)
Cisco (IP7940, IP7960)
Aastra (9480i, 9480i-CT, 6730i, 6731i, 6753, 6755i, 6757i, 6757i CT, 6737i)
GrandStream (GXP1450, GXP2100, GXP2110, GXP2120)
Escene (ES220, ES320, ES330, ES410, ES610)
Fanvil (C56, C58, C60, C62)
News:
When provisioning Yealink and Snom IP phone, MyPBX is not needed to
be set as the only DHCP server any more.
Figure 6-8
6.1.2.1 General Settings for Yealink
In this page, you can configure it before provisioning Yealink IP phones,
including the items like general preferences, codecs, remote phone book and
firmware upgrade.
Note: if firmware download server is enabled, IP phone will update the firmware
automatically according the version and server you have configured during the
provision process.