MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 57
Figure 6-16
6.1.2.4 Not configured phone
In this section, MyPBX will scan all the supported IP phones and display here, we
can click the 'MAC address' of IP phone and input the corresponding information
in the pop-up window, like figure 6-13.
Figure 6-17
6.1.2.5 Upload a file
Click “Upload a file” and choose the configure file of IP phone in the popup
window.
Note: the file format must be .cfg
Please edit the configuration files in advance before uploading.
Figure 6-18