MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 69
·Provider Name
A unique label to help you identify this trunk when listed in outbound rules,
incoming rules etc. Ex: “yeastar2”.
·Hostname/IP
Service provider‟s hostname or IP address. 4569 is the standard port number
used by IAX protocol. Don‟t change this part if it is not required.
·Username
Username of IAX account; Used for IAX trunk registration.
·Password
Password of IAX account
.Online number
Define the online number that expected by “Skype Connect” and some other SIP
service providers. Leave this field blank if it's no required.
·Maximum Channels
Controls the maximum number of outbound channels (simultaneous calls) that
can be used on this trunk. Inbound calls are not counted against the maximum.
Set as 0 to specify no maximum.
·Caller ID
Specify the caller ID to use when making outbound calls over this trunk. The
caller ID set in the “extension” screen will override the caller ID setting in
the “VOIP trunk” screen. Please note that not all the service providers support
this feature. Contact your service provider for more information.
·DOD
DOD (Direct Outward Dialing) means the caller ID displayed when dialing out,
before configure this, please make sure the provider supports this feature.
·Associated Extension
The extension make call out via IAX Trunk will display the associated DOD.
6.2.2.2 Service Provider
This is service provider trunk (peer to peer mode), which authorized using IP
address only. If you have got a trunk with IP address only, please choose this
type.
To Next Page
Loading...
Need help?
General
