YOKOGAWA 436106 User Manual

2-8
IM 04P01B01-17E
2.5 Registering Users
Users that can access the recorder via the Ethernet network must be registered. This
function is called login function.
Setup Items
LoginSet
Ethernet
End
Level
Register
User
Admin/User On/Off
Use/Not
User name
Login
Password
Login
Procedure
For a description of the basic operations, see “Basic Key Operations” on page vi.
Entering Basic Setting Mode
Hold down the
MENU
key for 3 seconds to display the Setting mode screen.
Next, hold down both the (
DISP
) key and the (
FUNC
) key for 3 seconds to
display the Basic Setting mode screen.
Note
To cancel an operation, press the ESC key.
Enabling/Disabling the Login Function
1. Press the key to select Ethernet and then press the key.
Basic=Ethernet
2. Press the key to select Login and then press the key.
Ethernet=Login
3. Press the key to select Use and then press the key.
The setting complete screen appears.
Login=On
4 Press the ESC key to return to the Ethernet menu.
Registering Users
5. Press the
key to select LoginSet and then press the key.
Ethernet=LoginSet
6. Press the key to select Admin (administrator) or User1 to User6, and then
press the key.
Level=Admin
7. Press the key to select On and then press the key.
Register=On
* When the key, key, or key is pressed while holding down the SHIFT key,
the operation is reversed as when the respective key is pressed by itself.
CHARACTER

YOKOGAWA 436106 Specifications

General

Brand	YOKOGAWA
Model	436106
Category	Measuring Instruments
Language	English