YOKOGAWA 436106 User Manual

4-4
IM 04P01B01-17E
Basic Setting Commands
Note
• The settings that are returned in response to a query in the basic setting mode will contain the
new settings even if they are not saved.
• In order to activate the settings that are changed using the basic setting commands, the
settings must be saved using the YE or XE command.
• If the settings are saved with the XE command, communication is not dropped. If saved with
the XE command, the settings that are changed using the YS/YB/YA/YN/YD/YQ/YK command
are activated after power-cycling the recorder.
• When the YE command is executed, communication is dropped. The response to the YE
command is not returned.
• The following settings cannot be changed.
Key lock, enabling/disabling of the customized menu function, user registration for Ethernet
communication.
Command Function Execution Mode Administrator User Page
Name
XA Sets alarm related settings. Basic Setting mode Yes No 4-20
XI Sets the A/D integral time. Basic Setting mode Yes No 4-21
XB Sets the burnout detection. Basic Setting mode Yes No 4-21
XJ Sets the RJC. Basic Setting mode Yes No 4-21
UC Changes the dot color (dot model). Basic Setting mode Yes No 4-21
UO Sets the pen offset compensation (pen model). Basic Setting mode Yes No 4-22
UP Sets the items to be printed. Basic Setting mode Yes No 4-22
UR Sets the periodic printout interval. Basic Setting mode Yes No 4-22
UM Sets the types of report data that are output to the Basic Setting mode Yes No 4-22
periodic printout.
UB Sets the display mode of the bar graph. Basic Setting mode Yes No 4-23
UI Sets whether to use moving average (dot model). Basic Setting mode Yes No 4-23
UJ Sets whether to use the input filter (pen model). Basic Setting mode Yes No 4-23
UK Sets whether to use of partial expanded recording. Basic Setting mode Yes No 4-23
UL Selects the display/printout language. Basic Setting mode Yes No 4-23
XN Selects the date format. Basic Setting mode Yes No 4-23
XT Selects the temperature unit. Basic Setting mode Yes No 4-23
UF Sets whether to use the extended functions. Basic Setting mode Yes No 4-23
UT Selects the time printout format. Basic Setting mode Yes No 4-24
XR Sets the remote control input (/R1 option). Basic Setting mode Yes No 4-24
YS Sets the RS-422A/485 interface (/C3 option). Basic Setting mode Yes No 4-24
XQ Sets the TLOG timer (/M1 option). Basic Setting mode Yes No 4-24
UN Changes the assignment of channels to the recording pen Basic Setting mode Yes No 4-25
(pen model, /M1 option).
US Sets the computation error procedure (/M1 option). Basic Setting mode Yes No 4-25
YB Sets the host name and domain name (/C7 option). Basic Setting mode Yes No 4-25
YA Sets the IP address (/C7 option). Basic Setting mode Yes No 4-25
YN Sets the DNS (/C7 option). Basic Setting mode Yes No 4-25
YD Sets whether to use the login function via communication Basic Setting mode Yes No 4-26
(/C7 option).
YQ Sets the communication timeout (/C7 option) Basic Setting mode Yes No 4-26
YK Sets keepalive (/C7 option). Basic Setting mode Yes No 4-26
UQ Sets the calibration correction mode and the number Basic Setting mode Yes No 4-26
of set points (/CC1 option).
UA Sets the record position. Basic Setting mode Yes No 4-26
UG Sets the Setting mode menu selection. Basic Setting mode Yes No 4-27
UH Sets the FUNC key menu selection. Basic Setting mode Yes No 4-27
UE Selects enable/disable for Start printout/End printout Basic Setting mode Yes No 4-27
and message format (/BT1 option).
YE Exits from Basic Setting mode. Basic Setting mode Yes No 4-27
XE Exits from Basic Setting mode. Basic Setting mode Yes No 4-27
Yes: Command usable
No: Command not usable
4.2 A List of Commands

YOKOGAWA 436106 Specifications

General

Brand	YOKOGAWA
Model	436106
Category	Measuring Instruments
Language	English