YOKOGAWA 436106 User Manual

4-5
IM 04P01B01-17E
4
Commands
Control Commands
Key Command Function Execution Mode Administrator User Page
Name
- DS Switches the execution mode. All modes Yes No 4-28
RCD PS Starts/Stops recording. Run mode Yes No 4-28
DISP UD Switches the screen/switches the channel. Run mode Yes No 4-28
FUNC AK Executes alarm acknowledge (AlarmACK) Run mode Yes No 4-28
FUNC TL Starts/stops/resets computation (/M1 option). Run mode Yes No 4-28
FUNC MP Starts/Stops manual print. Run mode Yes No 4-28
FUNC LS Starts/Stops the list (setting information) printout. Run mode Yes No 4-28
FUNC SU Starts/Stops the setup list (basic setting information) Run mode Yes No 4-28
printout.
FUNC MS Executes the message printout. Run mode Yes No 4-28
FUNC AC Clears the alarm printout buffer. Run mode Yes No 4-28
FUNC MC Clears the message printout buffer. Run mode Yes No 4-29
FUNC VG Resets the report data of the periodic printout. Run mode Yes No 4-29
- YC Initializes the settings. Basic Setting mode Yes No 4-29
- UY Stops the record position adjustment. Basic Setting mode Yes No 4-29
Yes: Command usable
No: Command not usable
Output Commands
Command Command Function Execution Mode Administrator User Page
Type Name
Control
BO Sets the byte output order. All modes Yes Yes 4-29
CS Sets the check sum All modes Yes Yes 4-29
(usable only during serial communications).
IF Sets the status filter All modes Yes Yes 4-29
CC Disconnects an Ethernet connection All modes Yes Yes 4-30
(usable only during Ethernet communications)
Setup, measurement, and computation data output
FE Outputs decimal point position, unit information, All modes Yes Yes 4-30
and setup data.
FD Outputs the most recent measured/computed data. Run mode Yes Yes 4-30
FY Outputs the statistical computation results. Run mode Yes Yes 4-30
FF Outputs FIFO data. Run mode Yes Yes 4-30
IS Outputs status information. All modes Yes Yes 4-31
FU Outputs user information. All modes Yes Yes 4-31
Yes: Command usable
No: Command not usable
RS-422A/485 Dedicated Commands
Command Function Execution Mode Administrator User Page
Name
Esc O Opens the instrument. All modes Yes Yes 4-31
Esc C Closes the instrument. All modes Yes Yes 4-31
Yes: Command usable
No: Command not usable
4.2 A List of Commands

YOKOGAWA 436106 Specifications

General

Brand	YOKOGAWA
Model	436106
Category	Measuring Instruments
Language	English