YOKOGAWA AQ1215A - Using the Network (LAN)

10-4
IM AQ1210-01EN
10.3 Using the Network (LAN)
Procedure
Connecting the Wired LAN Adapter (communication dongle)
1.
Connect a wired LAN adapter to the Type A USB port of the instrument.
AQ1210A, AQ1215A,
AQ1210E, AQ1215E,
AQ1215F, AQ1216F
Wired LAN adapter
(communication dongle)
USB Type A
(2 ports)
LAN cable
Note
Please use your own communication dongle. For the recommended communication dongles that can be
used with this instrument, contact your nearest YOKOGAWA dealer.
Network Setup Screen
2.
Press MENU to display the MENU screen.
3.
Press SETUP to display the system setup screen.
4.
Tap Network Setup to display the Network Setup screen.
Enables or disables the network
(Valid, Invalid)
Set the user name and password.
Enter the user name and password by following the procedure
provided in “Entering Character Strings” in the Getting Started
Guide, IM AQ1210-02EN.
Set the timeout period
(Infinite (0), 1 to 3600).
Set the DHCP
(OFF, ON).
Set the TCP/IP parameters. Applies the network settings