YOKOGAWA AQ1215A User Manual

10-3
IM AQ1210-01EN
System Setup
1
2
3
4
5
6
7
8
9
10
11
App
Index
10.2 Using the Power Save Mode
Procedure
1.
Press MENU to display the MENU screen.
2.
Press SETUP to display the system setup screen.
3.
Tap Power Save to display the Power Save screen.
When using the USB-AC adapter
Set the LCD brightness (Bright, Normal, Power save, OFF).
When using the battery
Set the sleep function
(OFF, 1m, 5m, 10m, 30m).
Set the LCD brightness
(Bright, Normal, Power save, OFF).
Explanation
Setting the Power Save Mode
LCD Brightness
You can set the LCD brightness.
Bright The screen is set bright. Use this setting in a bright environment. This setting uses a lot of
power. During battery operation, pay attention to the battery level.
Normal Normal brightness.
Power save Slightly darker the normal brightness. This setting can be used in a dark environment. The
battery lasts longer than the Normal setting.
OFF The LCD backlight is turned off. The battery lasts longer, even longer than the Power Save
setting. When you press any key, the backlight turns on for approximately 10 seconds.
Sleep
If the instrument is left standing for a certain period with the power turned on, the power will be
automatically switch to sleep mode.
If the instrument is left standing for 2 hours in sleep mode, the power automatically turns off. This
does not apply during averaged measurement or real-time measurement.
OFF The power will not be turned off.
1 min If you do not operate the instrument for 1 minute, the power will be automatically switched to
sleep mode.
5 min If you do not operate the instrument for 5 minutes, the power will be automatically switched to
sleep mode.
10 min If you do not operate the instrument for 10 minutes, the power will be automatically switched to
sleep mode.
30 min If you do not operate the instrument for 30 minutes, the power will be automatically switched to
sleep mode.

YOKOGAWA AQ1215A Specifications

General

Brand	YOKOGAWA
Model	AQ1215A
Category	Test Equipment
Language	English