6-20
IM AQ1210-01EN
6.4 Analyzing Sections
Procedure
Waveform Data Display
1.
Press MENU to display the MENU screen.
For details on the MENU screen, see the Getting Started Guide, IM AQ1210-02EN.
2.
Tap OTDR to display the OTDR screen.
• Switching the Display between TRACE Mode and MAP Mode
3.
Tap the TRACE/MAP button to set the data display screen to TRACE mode.
When the data display screen is in TRACE mode, the button is MAP.
4.
Perform a measurement or load a file to display a waveform on the screen.
When performing an averaged measurement, wait for the measurement to complete. When loading a
waveform data file, use an SOR file that has been measured and saved with the instrument.
Soft Key Menu (section analysis)
5.
Tap the soft key menu display button.
A soft key menu that can be used when real-time measurement or averaged measurement is not in
progress is displayed.
To Next Page
Loading...
Need help?
General
