<8. Specifications> 8-5
IM 80J01A01-01E
8.3 Measurement sample vessels
(1) Microplate
Following microplate types are applicable
6 well
12 well
24 well
48 well
96 well
384 well
1
1536 well
1
(2) Dish
Following dish types are applicable
35 mm Dish (By using 35 mm dish sample holder, up to
3 dishes are measurable in one experiment)
60 mm Dish (By using 60 mm dish sample holder, one dish
is measureable in one experiment)
(3) Slide glass
By using slideglass sample holder, up to 4 slide glasses are
applicable in one experiment
(4) Cover Glass Chamber
By using cover glass chamber holder, one cover glass chambdr is
applicable in one experiment
1
If 384 well microplate is measured by 2x objective lens, multiple wells are measured
by one FOV. Therefore in this case, measurement is inhibited. (Warning is
displayed.)
If 1536 well microplate is measured by 2x/ 4x objective lens, multiple wells are
measured by one FOV. Therefore in this case, measurement is inhibited. (Warning
is displayed.)
For details of sample vessels usable in CQ1, please refer to Technical
Information (TI 80J01A01-01E).
To Next Page
Loading...
Need help?
General
