YOKOGAWA CQ1 - Protocol Saving

<4. Measurement Procedures> 4-43
IM 80J01A01-01E
In 󳆟Wells󳆠 window of 󳆟Analysis󳆠 window (refer to page 5-51), make
󳏀 button to status (green), select wells which were executed
“PreRec” above procedure (selected wells become pink), and click
󳆟PreAnalyze󳆠.
Confirm that objects are detected properly in multiple wells. If it is
necessary to improve the result, adjust detecting condition in the field
which object isn’t detected properly.
4.7 Protocol Saving
In “Wells” window of “Imaging” window (refer to page 5-25), make 󳏀
button to status (green), select all wells for measurement in the
protocol (selected wells become light blue).
󳏀
①
Select all wells for
measurement in
the protocol