YOKOGAWA CQ1 - Basic Protocol Setting

<4. Measurement Procedures> 4-31
IM 80J01A01-01E
4.2 Basic Protocol Setting
Designate the folder for saving the measurement data in “Protocol”
window.
Select sample vessel in “Sample” window.
Designate parent folder
󳆽
Input suffix of folder name
Input description if needed
󳆽
Note
Please designate local drive (D:) as data storage folder. In
case of designating other than local drive (D:), performance
of HDD decreases, and it may cause errors during image
acquisition.