2-2 <2. Precautions for Use/Installation>
IM 80J01A01-01E
2.2 Installing the Equipment
Installation Conditions
Install this equipment in a location meeting the conditions specified
below. Please call service personnel when you install or move the
equipment.
Installation example 1)
In case of using CQ1 normal gas mixer.
Note
Please prepare following gas cylinder and regulator
Outlet pressure: Settable in 0.1 – 0.15MPa
Piping: Silicone tube (inside diameter 6 mm, outside diameter 10
mm) is connectable
To Next Page
Loading...
Need help?
General
