<7. Trouble Shooting> 7-17
IM 80J01A01-01E
Probable Cause / Corrective Action
Measurement data cannot be found
by HDD mode.
Confirm that the folder designated to
“Measurement List” is proper.
Designate the upper folder of
measurement data folder, whose
name is as <date_****>.
1
In the case of inquiring the dealer about trouble, it may need to send system log file.
For outputting of log file, please refer to page 5-7.
7.4 Other Trouble Shootings
Probable Cause / Corrective Action
Image Viewer window and/or
Thumbnail Chart window disappear
These windows can be shown by
Menu -> “View” menu.
Access to hard disk drive becomes
slower.
It might be that the free space on the
HDD is small.
Keep the free space by deleting
unused files.
(It is recommended that Windows
command “Defrag” is run after
deleting unused files.)
While image acquisition and analysis
are performed simultaneously, sound
of moter movement become noisy.
There are no influences to
measurement.
1
In the case of inquiring the dealer about trouble, it may need to send system log file.
For outputting of log file, please refer to page 5-7.
To Next Page
Loading...
Need help?
General
