YOKOGAWA DL9040 User Manual

5-126
IM 701310-17E
:MEASure:TRACe<x>?
Function Queries all settings related to the trace.
Syntax
:MEASure:TRACe<x>?
<x> = 1 to 8
Example
:MEASURE:TRACE1? -> :MEASURE:TRACE1:
:MEASURE:TRACE1? ->: MEASURE:TRACE1:
AREA1:BURST:STATE 0;:MEASURE:TRACE1:
AREA1:CMEAN:STATE 0;:MEASURE:TRACE1:
AREA1:CMODE 0;COUNT:STATE 0;:
MEASURE:TRACE1:AREA1:CRMS:STATE 0;:
MEASURE:TRACE1:AREA1:CSDEVIATION:
STATE 0;:MEASURE:TRACE1:AREA1:DELAY:
MEASURE:COUNT 1;POLARITYRISE;:
MEASURE:TRACE1:AREA1:DELAY:REFERENCE:
COUNT 1;POLARITY RISE;TRACE 1;:MEASURE:
TRACE1:AREA1:DELAY:SOURCE TRIGGER;
STATE 0;:MEASURE:TRACE1:AREA1:
DPROXIMAL:MODE PERCENT;PERCENT 10,90;
UNIT -3.0000000E+00,3.0000000E+00;:
MEASURE:TRACE1:AREA1:DT:STATE 0;:
MEASURE:TRACE1:AREA1:DUTYCYCLE:
STATE 0;:MEASURE:TRACE1:AREA1:FALL:
STATE 0;:MEASURE:TRACE1:AREA1:
FREQUENCY:STATE 0;:MEASURE:TRACE1:
AREA1:HIGH:STATE 0;:MEASURE:TRACE1:
AREA1:HILOW:STATE 0;:MEASURE:TRACE1:
AREA1:LOW:STATE 0;:MEASURE:TRACE1:
AREA1:MAXIMUM:STATE 0;:MEASURE:TRACE1:
AREA1:MEAN:STATE 0;:MEASURE:TRACE1:
AREA1:METHOD AUTO;MINIMUM:STATE 0;:
MEASURE:TRACE1:AREA1:NOVERSHOOT:
STATE 0;:MEASURE:TRACE1:AREA1:NWIDTH:
STATE 0;:MEASURE:TRACE1:AREA1:
PERFREQUENCY:STATE 0;:MEASURE:TRACE1:
AREA1:PERIOD:STATE 0;:MEASURE:TRACE1:
AREA1:POVERSHOOT:STATE 0;:MEASURE:
TRACE1:AREA1:PTOPEAK:STATE 0;:MEASURE:
TRACE1:AREA1:PWIDTH:STATE 0;:MEASURE:
TRACE1:AREA1:RISE:STATE 0;:MEASURE:
TRACE1:AREA1:RMS:STATE 0 ......
:MEASure:TRACe<x>:AREA<x>?
Function Queries all settings related to the area.
Syntax
:MEASure:TRACe<x>:AREA<x>?
<x> of TRACe<x> = 1 to 8
<x> of AREA<x> = 1 or 2
Example
:MEASURE:TRACE1:AREA1?
-> :MEASURE:TRACE1:AREA1:BURST:STATE 0;:
MEASURE:TRACE1:AREA1:CMEAN:STATE 0;:
MEASURE:TRACE1:AREA1:CMODE 0;COUNT:
STATE 0;:MEASURE:TRACE1:AREA1:CRMS:
STATE 0;:MEASURE:TRACE1:AREA1:
CSDEVIATION:STATE 0;:MEASURE:TRACE1:
AREA1:DELAY:MEASURE:COUNT 1;POLARITY
RISE;:MEASURE:TRACE1:AREA1:DELAY:
REFERENCE:COUNT 1;POLARITY RISE;
TRACE1;:MEASURE:TRACE1:AREA1:DELAY:
SOURCE TRIGGER;STATE 0;:MEASURE:TRACE1:
AREA1:DPROXIMAL:MODE PERCENT;
PERCENT 10,90;
UNIT -3.0000000E+00,3.0000000E+00;:
MEASURE:TRACE1:AREA1:DT:STATE 0;:
MEASURE:TRACE1:AREA1:DUTYCYCLE:
STATE 0;:MEASURE:TRACE1:AREA1:FALL:
STATE 0;:MEASURE:TRACE1:AREA1:
FREQUENCY:STATE 0;:MEASURE:TRACE1:
AREA1:HIGH:STATE 0;:MEASURE:TRACE1:
AREA1:HILOW:STATE 0;:MEASURE:TRACE1:
AREA1:LOW:STATE 0;:MEASURE:TRACE1:
AREA1:MAXIMUM:STATE 0;:MEASURE:TRACE1:
AREA1:MEAN:STATE 0;:MEASURE:TRACE1:
AREA1:METHOD AUTO;MINIMUM:STATE 0;:
MEASURE:TRACE1:AREA1:NOVERSHOOT:
STATE 0;:MEASURE:TRACE1:AREA1:NWIDTH:
STATE 0;:MEASURE:TRACE1:AREA1:
PERFREQUENCY:STATE 0;:MEASURE:TRACE1:
AREA1:PERIOD:STATE 0;:MEASURE:TRACE1:
AREA1:POVERSHOOT:STATE 0 ......
:MEASure:TRACe<x>:AREA<x>:ALL
Function Turns ON/OFF all waveform parameters.
Syntax
:MEASure:TRACe<x>:AREA<x>:ALL
{<Boolean>}
<x> of TRACe<x> = 1 to 8
<x> of AREA<x> = 1 or 2
Example
:MEASURE:TRACE1:AREA1:ALL ON
5.18 MEASure Group

YOKOGAWA DL9040 Specifications

General

Brand	YOKOGAWA
Model	DL9040
Category	Test Equipment
Language	English