YOKOGAWA DL9040 - Page 227

5-193
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
:TRIGger:ENHanced:SPIBus:DATA<x>:
HEXA<x>
Function Sets the data of the SPI bus trigger in hexadecimal
notation.
Syntax
:TRIGger:ENHanced:SPIBus:DATA<x>:
HEXA<x> {<String>}
<x> of DAT
A<x> = 1 or 2
<x> of HEXA<x> = 1 to 4
<String> = 2 characters by combining ‘0’ to ‘F’ and ‘X’
Example
:TRIGGER:ENHANCED:SPIBUS:DATA1:
HEXA1 "AB"
:TRIGger:ENHanced:SPIBus:DATA<x>:
PATTern<x>
Function Sets the data of the SPI bus trigger in binary notation
or queries the current setting.
Syntax
:TRIGger:ENHanced:SPIBus:DATA<x>:
PATTern<x> {<String>}
:TRIGger:ENHanced:SPIBus:DATA<x>:
PATTern<x>?
<x> of DAT
A<x> = 1 or 2
<x> of PATTern<x> = 1 to 4
<String> = 8 characters by combining ‘0,’ ‘1,’ and ‘X’
Example
:TRIGGER:ENHANCED:SPIBUS:DATA1:
PATTERN1 "10101011"
:TRIGGER:ENHANCED:SPIBUS:DATA1:
PATTERN1? -> :TRIGGER:ENHANCED:SPIBUS:
DATA1:PATTERN1 "10101011"
:TRIGger:ENHanced:SPIBus:DATA<x>:
SOURce
Function Sets the trace of the data of the SPI bus trigger or
queries the current setting.
Syntax
:TRIGger:ENHanced:SPIBus:DATA<x>:
SOURce {<NRf>}
:TRIGger:ENHanced:SPIBus:DATA<x>:
SOURce?
<x> = 1 or 2
<NRf> = 1 to 4
Example
:TRIGGER:ENHANCED:SPIBUS:DATA1:SOURCE 1
:TRIGGER:ENHANCED:SPIBUS:DATA1:SOURCE?
-> :TRIGGER:ENHANCED:SPIBUS:DATA1:
SOURCE 1
:TRIGger:ENHanced:SPIBus:MODE
Function Sets the wiring system of the SPI bus trigger (three-
wire or four-wire) or queries the current setting.
Syntax
:TRIGger:ENHanced:SPIBus:MODE {WIRE3|
WIRE4}
:TRIGger:ENHanced:SPIBus:MODE?
Example
:TRIGGER:ENHANCED:SPIBUS:MODE WIRE3
:TRIGGER:ENHANCED:SPIBUS:MODE?
-> :TRIGGER:ENHANCED:SPIBUS:MODE WIRE3
:TRIGger:ENHanced:TV?
Function Queries all settings related to the TV trigger.
Syntax
:TRIGger:ENHanced:TV?
Example
:TRIGGER:ENHANCED:TV?
-> :TRIGGER:ENHANCED:TV:CUSTOMIZE 1;
FIELD DONTCARE;FRAME 2;HDTV:LINE 2;
POLARITY NEGATIVE;:TRIGGER:ENHANCED:
TV:LEVEL 1.000E+00;NTSC:LINE 5;
POLARITY NEGATIVE;:TRIGGER:ENHANCED:TV:
PAL:LINE 2;POLARITY NEGATIVE;:TRIGGER:
ENHANCED:TV:SDTV:LINE 8;
POLARITY NEGATIVE;:TRIGGER:ENHANCED:TV:
SGUARD 60;SOURCE 1;TYPE HDTV;
USERDEFINE:DEFINITION HD;
HFREJECTION OFF;HSYNC 50.00E+06;LINE 2;
POLARITY NEGATIVE
:TRIGger:ENHanced:TV:COUPling?
Function Queries the trigger coupling of the TV trigger.
Syntax
:TRIGger:ENHanced:TV:COUPling?
Example
:TRIGGER:ENHANCED:TV:COUPLING?
-> :TRIGGER:ENHANCED:TV:COUPLING TV
:TRIGger:ENHanced:TV:CUSTomize
Function Turns ON/OFF the sync guard function of the TV
trigger or queries the current setting.
Syntax
:TRIGger:ENHanced:TV:
CUSTomize {<Boolean>}
:TRIGger:ENHanced:TV:CUSTomize?
Example
:TRIGGER:ENHANCED:TV:CUSTOMIZE ON
:TRIGGER:ENHANCED:TV:CUSTOMIZE?
-> :TRIGGER:ENHANCED:TV:CUSTOMIZE 1
:TRIGger:ENHanced:TV:FIELd
Function Sets the field of the TV trigger or queries the current
setting.
Syntax
:TRIGger:ENHanced:TV:FIELd {DONTcare|
<NRf>}
:TRIGger:ENHanced:TV:FIELd?
<NRf> = 1 or 2
Example
:TRIGGER:ENHANCED:TV:FIELD DONTCARE
:TRIGGER:ENHANCED:TV:FIELD?
-> :TRIGGER:ENHANCED:TV:FIELD DONTCARE
:TRIGger:ENHanced:TV:FRAMe
Function Sets the frame skip function of the TV trigger or
queries the current setting.
Syntax
:TRIGger:ENHanced:TV:FRAMe {<NRf>}
:TRIGger:ENHanced:TV:FRAMe?
<NRf> = 1, 2, 4, or 8
Example
:TRIGGER:ENHANCED:TV:FRAME 2
:TRIGGER:ENHANCED:TV:FRAME?
-> :TRIGGER:ENHANCED:TV:FRAME 2
5.29 TRIGger Group