YOKOGAWA DL9040 - Page 228

5-194
IM 701310-17E
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}?
Function Queries all settings related to the TV trigger mode.
Syntax
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}?
Example (The following is an example for the HDTV.)
:TRIGGER:ENHANCED:TV:HDTV?
-> :TRIGGER:ENHANCED:TV:HDTV:LINE 2;
POLARITY NEGATIVE
:TRIGger:ENHanced:TV:{HDTV|NTSC|
PAL|SDTV}:HFRejection?
(HighFrequencyREJECTION)
Function Queries the low pass filter (HF rejection) of the TV
trigger.
Syntax
TRIGger:ENHanced:TV:{HDTV|NTSC|
PAL|SDTV}:HFRejection?
Example (The following is an example for the HDTV.)
:TRIGGER:ENHANCED:TV:HDTV:HFREJECTION?
-> :TRIGGER:ENHANCED:TV:HDTV:
HFREJECTION OFF
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}:LINE
Function Sets the line for activating the TV trigger or queries
the current setting.
Syntax
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}:LINE
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}:LINE {<NRf>}
<NRf> = 2 to 2251 (for HDTV)
5 to 1054 (for NTSC)
2 to 1251 (for PAL)
8 to 2251 (for SDTV)
2 to 2251 (for USERdefine)
Example (The following is an example for the HDTV.)
:TRIGGER:ENHANCED:TV:HDTV:LINE 10
:TRIGGER:ENHANCED:TV:HDTV:LINE?
-> :TRIGGER:ENHANCED:TV:HDTV:LINE 10
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}:POLarity
Function Sets the input polarity of the TV trigger or queries the
current setting.
Syntax
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}:POLarity
{NEGative|POSitive}
:TRIGger:ENHanced:TV:{HDTV|NTSC|PAL|
SDTV|USERdefine}:POLarity?
Example (The following is an example for the HDTV.)
:TRIGGER:ENHANCED:TV:HDTV:
POLARITY NEGATIVE
:TRIGGER:ENHANCED:TV:HDTV:POLARITY?
-> :TRIGGER:ENHANCED:TV:HDTV:
POLARITY NEGATIVE
:TRIGger:ENHanced:TV:LEVel
Function Sets the trigger level of the TV trigger or queries the
current setting.
Syntax
:TRIGger:ENHanced:TV:LEVel {<NRf>}
:TRIGger:ENHanced:TV:LEVel?
<NRf> = 0.1 to 2.0 (div)
Example
:TRIGGER:ENHANCED:TV:LEVEL 1
:TRIGGER:ENHANCED:TV:LEVEL?
-> :TRIGGER:ENHANCED:TV:LEVEL 1.000E+00
:TRIGger:ENHanced:TV:SGUard
Function Sets the sync guard of the TV trigger or queries the
current setting.
Syntax
:TRIGger:ENHanced:TV:SGUard {<NRf>}
:TRIGger:ENHanced:TV:SGUard?
<NRf> = 60 to 90 (%)
Example
:TRIGGER:ENHANCED:TV:SGUARD 60
:TRIGGER:ENHANCED:TV:SGUARD?
-> :TRIGGER:ENHANCED:TV:SGUARD 60
Description This command is valid when
:TRIGGER:ENHANCED:
TV:TYPE HDTV|NTSC|PAL
.
:TRIGger:ENHanced:TV:SOURce
Function Sets the trigger source of the TV trigger or queries
the current setting.
Syntax
:TRIGger:ENHanced:TV:SOURce {<NRf>}
:TRIGger:ENHanced:TV:SOURce?
<NRf> = 1 to 4
Example
:TRIGGER:ENHANCED:TV:SOURCE 1
:TRIGGER:ENHANCED:TV:SOURCE?
-> :TRIGGER:ENHANCED:TV:SOURCE 1
:TRIGger:ENHanced:TV:TYPE
Function Sets the input type of the TV trigger or queries the
current setting.
Syntax
:TRIGger:ENHanced:TV:TYPE {HDTV|NTSC|
PAL|SDTV|USERdefine,I1080_50|I1080_60|
P1080_24|P1080_25|P1080_60|P720_60|
SF1080_24}
:TRIGger:ENHanced:TV:TYPE?
Example
:TRIGGER:ENHANCED:TV:TYPE NTSC
:TRIGGER:ENHANCED:TV:TYPE? -> TRIGGER:
ENHANCED:TV:TYPE NTSC
Description For {HDTV}, select the next {I1080_50|I1080_60|P10
80_24|P1080_25|P1080_60|
P720_60|SF1080_24}. If not selected {I1080_60} is
selected automatically.
5.29 TRIGger Group