YOKOGAWA DL9040 - Page 59

5-25
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
Command Function Page
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7APsub?
Queries all settings related to the 7-bit + Sub address of the I
2
C bus trigger. 5-163
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7APsub:ADDRess?
Queries all settings related to the 7-bit address of the 7-bit + Sub address of
the I
2
C bus trigger.
5-164
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7APsub:ADDRess:
HEXA
Sets the 7-bit address of the 7-bit + Sub address of the I
2
C bus trigger in
hexadecimal notation.
5-164
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7APsub:ADDRess:
PATTern
Sets the 7-bit address of the 7-bit + Sub address of the I2C bus trigger in
binary notation or queries the current setting.
5-164
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7APsub:
SADDress?
Queries all settings related to the Sub address of the 7-bit + Sub address of
the I
2
C bus trigger.
5-164
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7APsub:
SADDress:HEXA
Sets the Sub address of the 7-bit + Sub address of the I
2
C bus trigger in
hexadecimal notation.
5-164
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7APsub:
SADDress:PATTern
Sets the Sub address of the 7-bit + Sub address of the I
2
C bus trigger in
binary notation or queries the current setting.
5-164
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:TYPE
Sets the address type of the I
2
C bus trigger or queries the current setting. 5-164
:TRIGger:EINTerval:EVENt<x>:
I2CBus:CLOCk?
Queries all settings related to the clock of the I
2
C bus trigger. 5-165
:TRIGger:EINTerval:EVENt<x>:
I2CBus:CLOCk:SOURce
Sets the clock trace of the I
2
C bus trigger or queries the current setting. 5-165
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA?
Queries all settings related to the data of the I
2
C bus trigger. 5-165
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:BYTE
Sets the number of data bytes of the I
2
C bus trigger or queries the current
setting.
5-165
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:CONDition
Sets the determination method (match or not match) of the data of the I
2
C
bus trigger or queries the current setting.
5-165
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:DPOSition
Sets the position for comparing the data pattern of the I
2
C bus trigger or
queries the current setting.
5-165
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:HEXA<x>
Sets the data of the I
2
C bus trigger in hexadecimal notation. 5-166
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:MODE
Enables/Disables the data conditions of the I
2
C bus trigger or queries the
current setting.
5-166
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:PATTern<x>
Sets the data of the I
2
C bus trigger in binary notation or queries the current
setting.
5-166
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:PMODe
Sets the pattern comparison start position mode of the data of the I
2
C bus
trigger or queries the current setting.
5-166
:TRIGger:EINTerval:EVENt<x>:
I2CBus:DATA:SOURce
Sets the data trace of the I
2
C bus trigger or queries the current setting. 5-166
:TRIGger:EINTerval:EVENt<x>:
I2CBus:GCALl?
Queries all settings related to the general call of the I2C bus trigger. 5-166
:TRIGger:EINTerval:EVENt<x>:
I2CBus:GCALl:BIT7maddress?
Queries all settings related to the 7-bit master address of the general call of
the I
2
C bus trigger.
5-167
:TRIGger:EINTerval:EVENt<x>:
I2CBus:GCALl:BIT7maddress:HEXA
Sets the 7-bit master address of the general call of the I
2
C bus trigger in
hexadecimal notation.
5-167
:TRIGger:EINTerval:EVENt<x>:
I2CBus:GCALl:BIT7maddress:
PATTern
Sets the 7-bit master address of the general call of the I
2
C bus trigger in
binary notation or queries the current setting.
5-167
:TRIGger:EINTerval:EVENt<x>:
I2CBus:GCALl:SBYTe (Second Byte)
Sets the second byte type of the general call of the I
2
C bus trigger or queries
the current setting.
5-167
:TRIGger:EINTerval:EVENt<x>:
I2CBus:MODE
Sets the trigger mode of the I
2
C bus trigger or queries the current setting. 5-167
:TRIGger:EINTerval:EVENt<x>:
I2CBus:NAIGnore?
Queries all settings related to the NON ACK ignore mode of the I
2
C bus
trigger.
5-167
:TRIGger:EINTerval:EVENt<x>:
I2CBus:NAIGnore:HSMode
Sets whether to ignore NON ACK in high speed mode of the I
2
C bus trigger
or queries the current setting.
5-168
:TRIGger:EINTerval:EVENt<x>:
I2CBus:NAIGnore:RACCess
Sets whether to ignore NON ACK in read access mode of the I
2
C bus trigger
or queries the current setting.
5-168
:TRIGger:EINTerval:EVENt<x>:
I2CBus:NAIGnore:SBYTe (Start
Byte)
Sets whether to ignore NON ACK in the start byte of the I
2
C bus trigger or
queries the current setting.
5-168
5.1 List of Commands