YOKOGAWA DL9040 - Page 58

5-24
IM 701310-17E
Command Function Page
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:FORMat
Sets each message format (standard or extended) of the OR condition of the
CAN bus signal trigger or queries the current setting.
5-158
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:IDEXt?
Queries all settings related to the ID of each extended format of the OR
condition of the CAN bus signal trigger.
5-158
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:IDEXt:HEXA
Sets the ID of each extended format of the OR condition of the CAN bus
signal trigger in hexadecimal notation.
5-159
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:IDEXt:PATTern
Sets the ID of each extended format of the OR condition of the CAN bus
signal trigger in binary notation or queries the current setting.
5-159
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:IDSTd?
Queries all settings related to the ID of each standard format of the OR
condition of the CAN bus signal trigger.
5-159
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:IDSTd:HEXA
Sets the ID of each standard format of the OR condition of the CAN bus
signal trigger in hexadecimal notation.
5-159
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:IDSTd:PATTern
Sets the ID of each standard format of the OR condition of the CAN bus
signal trigger in binary notation or queries the current setting.
5-159
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:MODE
Enables or disables each condition of the OR condition of the CAN bus
signal trigger or queries the current setting.
5-159
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:RTR
Sets each RTR of the OR condition of the CAN bus signal trigger or queries
the current setting.
5-160
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDSTd?
Queries all settings related to the ID of the standard format of the CAN bus
signal trigger.
5-160
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDSTd:HEXA
Sets the ID of the standard format of the CAN bus signal trigger in
hexadecimal notation.
5-160
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDSTd:PATTern
Sets the ID of the standard format of the CAN bus signal trigger in binary
notation or queries the current setting.
5-160
:TRIGger:EINTerval:EVENt<x>:
CANBus:MODE
Sets the CAN bus signal trigger mode or queries the current setting. 5-160
:TRIGger:EINTerval:EVENt<x>:
CANBus:RECessive
Sets the recessive level (bus level) of the CAN bus signal trigger or queries
the current setting.
5-160
:TRIGger:EINTerval:EVENt<x>:
CANBus:RTR
Sets the RTR of the CAN bus signal trigger or queries the current setting. 5-161
:TRIGger:EINTerval:EVENt<x>:
CANBus:SOURce
Sets the trigger source of the CAN bus signal trigger or queries the current
setting.
5-161
:TRIGger:EINTerval:EVENt<x>:
CANBus:SPOint
Sets the sample point of the CAN bus signal trigger or queries the current
setting.
5-161
:TRIGger:EINTerval:EVENt<x>:
CLOCk?
Queries all settings related to the clock channel of the event. 5-161
:TRIGger:EINTerval:EVENt<x>:
CLOCk:POLarity
Sets the polarity of the clock channel of the event or queries the current
setting.
5-161
:TRIGger:EINTerval:EVENt<x>:
CLOCk:SOURce
Sets the source waveform of the clock channel of the event or queries the
current setting.
5-161
:TRIGger:EINTerval:EVENt<x>:
ESTate?
Queries all settings related to the edge/state trigger. 5-161
:TRIGger:EINTerval:EVENt<x>:
ESTate:POLarity
Sets the polarity of the edge/state trigger or queries the current setting. 5-162
:TRIGger:EINTerval:EVENt<x>:
ESTate:SOURce
Sets the trigger source of the edge/state trigger or queries the current
setting.
5-162
:TRIGger:EINTerval:EVENt<x>:
I2CBus?
Queries all settings related to the I
2
C bus trigger of the event. 5-162
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa?
Queries all settings related to the address of the I
2
C bus trigger. 5-162
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT10address?
Queries all settings related to the 10-bit address of the I
2
C bus trigger. 5-163
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT10address:HEXA
Sets the 10-bit address of the I
2
C bus trigger in hexadecimal notation. 5-163
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT10address:
PATTern
Sets the 10-bit address of the I
2
C bus trigger in binary notation or queries the
current setting.
5-163
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7ADdress?
Queries all settings related to the 7-bit address of the I
2
C bus trigger. 5-163
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7ADdress:HEXA
Sets the 7-bit address of the I
2
C bus trigger in hexadecimal notation. 5-163
:TRIGger:EINTerval:EVENt<x>:
I2CBus:ADATa:BIT7ADdress:
PATTern
Sets the 7-bit address of the I
2
C bus trigger in binary notation or queries the
current setting.
5-163
5.1 List of Commands