YOKOGAWA DL9040 - Page 57

5-23
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
Command Function Page
:TRIGger:DELay:EDGecount?
Queries all settings related to edge count of the trigger delay. 5-150
:TRIGger:DELay:EDGecount:COUNt
Sets the edge count value of the trigger delay or queries the current setting. 5-150
:TRIGger:DELay:MODE
Turns ON/OFF the trigger delay or queries the current setting. 5-151
:TRIGger:DELay:POLarity
Sets the edge polarity the trigger delay or queries the current setting. 5-151
:TRIGger:DELay:SOURce
Sets the edge source the trigger delay or queries the current setting. 5-151
:TRIGger:DELay:TIME
Sets the delay value the trigger delay or queries the current setting. 5-151
:TRIGger:DELay:TYPE
Sets the trigger delay type or queries the current setting. 5-151
:TRIGger:EINTerval?
Queries all settings related to the event interval. 5-151
:TRIGger:EINTerval:EVENt<x>?
Queries all settings related to the event. 5-152
:TRIGger:EINTerval:EVENt<x>:
CANBus?
Queries all settings related to the CAN bus signal trigger of the event. 5-152
:TRIGger:EINTerval:EVENt<x>:
CANBus:ACK
Sets the ACK condition of the CAN bus signal trigger or queries the current
setting.
5-153
:TRIGger:EINTerval:EVENt<x>:
CANBus:BRATe
Sets the bit rate (data transfer rate) of the CAN bus signal trigger or queries
the current setting.
5-153
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA?
Queries all settings related to the CAN bus signal trigger data. 5-153
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:BORDer
Sets the byte order of the CAN bus signal trigger data or queries the current
setting.
5-153
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:CONDition
Sets the data condition of the CAN bus signal trigger or queries the current
setting.
5-153
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:DATA<x>
Sets the comparison data of the CAN bus signal trigger data or queries the
current setting.
5-154
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:DLC
Sets the number of valid bytes (DLC) of the CAN bus signal trigger data or
queries the current setting.
5-154
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:HEXA
Sets the CAN bus signal trigger data in hexadecimal notation. 5-154
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:MSBLsb
Sets the MSB and LSB bits of the CAN bus signal trigger data or queries the
current setting.
5-154
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:PATTern
Sets the CAN bus signal trigger data in binary notation or queries the current
setting.
5-154
:TRIGger:EINTerval:EVENt<x>:
CANBus:DATA:SIGN
Sets the sign of the CAN bus signal trigger data or queries the current
setting.
5-155
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDEXt?
Queries all settings related to the ID of the extended format of the CAN bus
signal trigger.
5-155
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDEXt:HEXA
Sets the ID of the extended format of the CAN bus signal trigger in
hexadecimal notation.
5-155
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDEXt:PATTern
Sets the ID of the extended format of the CAN bus signal trigger in binary
notation or queries the current setting.
5-155
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR?
Queries all settings related to the OR condition of the CAN bus signal trigger. 5-156
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>?
Queries all settings related to each ID of the OR condition of the CAN bus
signal trigger.
5-156
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:ACK
Sets each ACK condition of the OR condition of the CAN bus signal trigger
or queries the current setting.
5-156
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA?
Queries all settings related to each data of the OR condition of the CAN bus
signal trigger.
5-157
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:BORDer
Sets byte order of each data of the OR condition of the CAN bus signal
trigger or queries the current setting.
5-157
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:
CONDition
Sets each data condition of the OR condition of the CAN bus signal trigger or
queries the current setting.
5-157
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:DATA<x>
Sets comparison data of each data of the OR condition of the CAN bus
signal trigger or queries the current setting.
5-157
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:DLC
Sets the number of valid bytes (DLC) of each data of the OR condition of the
CAN bus signal trigger or queries the current setting.
5-157
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:HEXA
Sets each data of the OR condition of the CAN bus signal trigger in
hexadecimal notation.
5-158
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:MSBLsb
Sets the MSB and LSB bits of each data of the OR condition of the CAN bus
signal trigger or queries the current setting.
5-158
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:PATTern
Sets each data of the OR condition of the CAN bus signal trigger in binary
notation or queries the current setting.
5-158
:TRIGger:EINTerval:EVENt<x>:
CANBus:IDOR:ID<x>:DATA:SIGN
Sets sign of each data of the OR condition of the CAN bus signal trigger or
queries the current setting.
5-158
5.1 List of Commands