YOKOGAWA DLM2000 Series - Page 118

5-85
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:CURSor[:TY]:HORizontal:DV:STATe
Function Sets or queries the on/off status of the vertical
valuemeasuredbetweentheΔVcursors.
Syntax
:CURSor[:TY]:HORizontal:DV:STA
Te {<Boolean>}
:CURSor[:TY]:HORizontal:DV:STATe?
Example
:CURSOR:TY:HORIZONTAL:DV:STATE ON
:CURSOR:TY:HORIZONTAL:DV:STATE?
-> :CURSOR:TY:HORIZONTAL:DV:STATE 1
:CURSor[:TY]:HORizontal:DV:VALue?
Function QueriestheverticalvaluebetweentheΔVcursors.
Syntax
:CURSor[:TY]:HORizontal:DV:VALue?
Example
:CURSOR:TY:HORIZONTAL:DV:VALUE?
-> :CURSOR:TY:HORIZONTAL:DV:VALUE 3.0
000000E+00
Description When linear scaling is on, the DLM2000 returns
the scaled value.
:CURSor[:TY]:HORizontal:POSition<x>
Function Sets or queries the position of a vertical cursor.
Syntax
:CURSor[:TY]:HORizontal:POSition
<x> {<NRf>}
:CURSor[:TY]:HORizontal:POSition<x>?
<x> = 1 or 2
<NRf>=−4to4(in1/100steps)
Example
:CURSOR:TY:HORIZONTAL:POSITION1−4
:CURSOR:TY:HORIZONTAL:POSITION1?
-> :CURSOR:TY:HORIZONTAL:POSITION1−4
Description The least significant digit for <NRf> is the
hundredths place.
:CURSor[:TY]:HORizontal:TRACe
Function Sets or queries the source waveform that you
wanttomeasureusingtheΔVcursors.
Syntax
:CURSor[:TY]:HORizontal:TRACe {<NRf>|
MATH<x>}
:CURSor[:TY]:HORizontal:TRACe?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> = 1 or 2 (1 only for 2-channel models)
Example
:CURSOR:TY:HORIZONTAL:TRACE 1
:CURSOR:TY:HORIZONTAL:TRACE?
-> :CURSOR:TY:HORIZONTAL:TRACE 1
:CURSor[:TY]:HORizontal:V<x>?
Function QueriesallverticalaxissettingsforaΔVcursor.
Syntax
:CURSor[:TY]:HORizontal:V<x>?
<x> = 1 or 2
:CURSor[:TY]:HORizontal:V<x>:STATe
Function Sets or queries the on/off status of the vertical
valuemeasuredforaΔVcursor.
Syntax
:CURSor[:TY]:HORizontal:V<x>:STA
Te {<Boolean>}
:CURSor[:TY]:HORizontal:V<x>:STATe?
<x> = 1 or 2
Example
:CURSOR:TY:HORIZONTAL:V1:STATE ON
:CURSOR:TY:HORIZONTAL:V1:STATE?
-> :CURSOR:TY:HORIZONTAL:V1:STATE 1
:CURSor[:TY]:HORizontal:V<x>:VALue?
Function QueriestheverticalvalueofaΔVcursor.
Syntax
:CURSor[:TY]:HORizontal:V<x>:VALue?
<x> = 1 or 2
Example
:CURSOR:TY:HORIZONTAL:V1:VALUE?
-> :CURSOR:TY:HORIZONTAL:V1:VALUE−1.
5000000E+00
Description When linear scaling is on, the DLM2000 returns
the scaled value.
:CURSor[:TY]:MARKer?
Function Queries all marker cursor settings.
Syntax
:CURSor[:TY]:MARKer?
:CURSor[:TY]:MARKer:FORM
Function Sets or queries the marker cursor form.
Syntax
:CURSor[:TY]:MARKer:FORM {LINE|MARK}
:CURSor[:TY]:MARKer:FORM?
Example
:CURSOR:TY:MARKER:FORM LINE
:CURSOR:TY:MARKER:FORM?
-> :CURSor[:TY]:MARKER:FORM LINE
:CURSor[:TY]:MARKer:M<x>?
Function Queries all settings for the specified marker.
Syntax
:CURSor[:TY]:MARKer:M<x>?
<x> = 1 to 4
:CURSor[:TY]:MARKer:M<x>:ALL
Function Collectively turns on or off the measured values of
the marker cursor on the T-Y display.
Syntax
:CURSor:TY:MARKer:M<x>:ALL
{<Boolean>}
<x> = 1 to 4
Example
:CURSOR:TY:MARKER:M1:ALL ON
:CURSor[:TY]:MARKer:M<x>:DT<x>?
Function Queries all of the settings related to time
measurement between marker cursors.
Syntax
:CURSor[:TY]:MARKer:M<x>:DT<x>?
<x> = 1 to 4
<y> = 1 to 4
5.9 CURSor Group