YOKOGAWA DLM2000 Series - Page 121

5-88
IM 710105-17E
:CURSor[:TY]:VERTical:DV:VALue?
Function QueriestheverticalvaluebetweentheΔTcursors.
Syntax
:CURSor[:TY]:VERTical:DV:VALue?
Example
:CURSOR:TY:VERTICAL:DV:VALUE?
-> :CURSOR:TY:VERTICAL:DV:VALUE 1.50E
+03
Description When linear scaling is on, the DLM2000 returns
the scaled value.
:CURSor[:TY]:VERTical:JUMP
Function Makes a vertical cursor in the T-Y display jump to
the specified zoom waveform.
Syntax
:CURSor[:TY]:VERTical:JUMP {C1_Z1|
C1_Z2|C2_Z1|C2_Z2}
Example
:CURSOR:TY:VERTICAL:JUMP C1_Z1
Description Jumps to the center of the zoom waveform. C1
and C2 are used to indicate V cursors Cursor1
and Cursor2.
:CURSor[:TY]:VERTical:PERDt?
Function Queriesalltimeaxissettingsfor1/ΔT,whichis
measuredbetweentheΔTcursors.
Syntax
:CURSor[:TY]:VERTical:PERDt?
:CURSor[:TY]:VERTical:PERDt:STATe
Function Setsorqueriestheon/offstatusofthe1/ΔT,which
ismeasuredbetweentheΔTcursors.
Syntax
:CURSor[:TY]:VERTical:PERDt:STATe {<B
oolean>}
:CURSor[:TY]:VERTical:PERDt:STATe?
Example
:CURSOR:TY:VERTICAL:PERDT:STATE ON
:CURSOR:TY:VERTICAL:PERDT:STATE?
-> :CURSOR:TY:VERTICAL:PERDT:STATE 1
:CURSor[:TY]:VERTical:PERDt:VALue?
Function Queriesthe1/ΔTvalue,whichismeasured
betweentheΔTcursors.
Syntax
:CURSor[:TY]:VERTical:PERDt:VALue?
Example
:CURSOR:TY:VERTICAL:PERDT:VALUE?
-> :CURSOR:TY:VERTICAL:PERDT:VALUE 2.
50E+06
:CURSor[:TY]:VERTical:POSition<x>
Function SetsorqueriesthepositionofaΔTcursor.
Syntax
:CURSor[:TY]:VERTical:POSition
<x> {<NRf>}
:CURSor[:TY]:VERTical:POSition<x>?
<x> = 1 or 2
 <NRf>=−5to5(instepsof10divisions/display
record length)
Example
:CURSOR:TY:VERTICAL:POSITION1 2
:CURSOR:TY:VERTICAL:POSITION1?
-> :CURSOR:TY:VERTICAL:POSITION1 2.00
E+00
:CURSor[:TY]:VERTical:T<x>?
Function QueriesalltimeaxissettingsforaΔTcursor.
Syntax
:CURSor[:TY]:VERTical:T<x>?
<x> = 1 or 2
:CURSor[:TY]:VERTical:T<x>:STATe
Function Sets or queries the on/off status of the time value
ofaΔTcursor.
Syntax
:CURSor[:TY]:VERTical:T<x>:STA
Te {<Boolean>}
:CURSor[:TY]:VERTical:T<x>:STATe?
<x> = 1 or 2
Example
:CURSOR:TY:VERTICAL:T1:STATE ON
:CURSOR:TY:VERTICAL:T1:STATE?
-> :CURSOR:TY:VERTICAL:T1:STATE 1
:CURSor[:TY]:VERTical:T<x>:VALue?
Function QueriesthetimevalueofaΔTcursor.
Syntax
:CURSor[:TY]:VERTical:T<x>:VALue?
<x> = 1 or 2
Example
:CURSOR:TY:VERTICAL:T1:VALUE?
-> :CURSOR:TY:VERTICAL:T1:VALUE−2.50
E−06
:CURSor[:TY]:VERTical:TRACe
Function Sets or queries the source waveform that you
wanttomeasureusingtheΔTcursors.
Syntax
:CURSor[:TY]:VERTical:TRACe {<NRf>|AL
L|MATH<x>}
:CURSor[:TY]:VERTical:TRACe?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> = 1 or 2 (1 only for 2-channel models)
Example
:CURSOR:TY:VERTICAL:TRACE 1
:CURSOR:TY:VERTICAL:TRACE?
-> :CURSOR:TY:VERTICAL:TRACE 1
:CURSor[:TY]:VERTical:V<x>?
Function QueriesallverticalaxissettingsforaΔTcursor.
Syntax
:CURSor[:TY]:VERTical:V<x>?
<x> = 1 or 2
:CURSor[:TY]:VERTical:V<x>:STATe
Function Sets or queries the on/off status of the vertical
valueofaΔTcursor.
Syntax
:CURSor[:TY]:VERTical:V<x>:STA
Te {<Boolean>}
:CURSor[:TY]:VERTical:V<x>:STATe?
<x> = 1 or 2
Example
:CURSOR:TY:VERTICAL:V1:STATE ON
:CURSOR:TY:VERTICAL:V1:STATE?
-> :CURSOR:TY:VERTICAL:V1:STATE 1
5.9 CURSor Group