YOKOGAWA DLM2000 Series User Manual

5-96
IM 710105-17E
:FFT<x>:MEASure:PEAK[:BASic]:ALL
Function Collectively turns on or off all Basic peak items for
FFT analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:A
LL {<Boolean>}
<x> = 1 or 2 (1 only for 2-channel models)
Example
:FFT1:MEASURE:PEAK:BASIC:ALL ON
:FFT<x>:MEASure:PEAK[:BASic]:DFReque
ncy?
Function Queries all of the settings for frequency
measurement between peak values for FFT
analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:DFRequen
cy?
<x> = 1 or 2 (1 only for 2-channel models)
:FFT<x>:MEASure:PEAK[:BASic]:DFReque
ncy:STATe
Function Sets or queries the on/off status of the frequency
measured between peak values for FFT analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:DFRequen
cy:STATe {<Boolean>}
:FFT<x>:MEASure:PEAK[:BASic]:DFRequen
cy:STATe?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:FFT1:MEASURE:PEAK:BASIC:DFREQUENCY:S
TATE ON
:FFT1:MEASURE:PEAK:BASIC:DFREQUENCY:S
TATE?
-> :FFT1:MEASURE:PEAK:BASIC:DFREQUENC
Y:STATE 1
:FFT<x>:MEASure:PEAK[:BASic]:DFReque
ncy:VALue?
Function Queries the frequency between peak values for
FFT analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:DFRequen
cy:VALue?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:FFT1:MEASURE:PEAK:BASIC:DFREQUENCY:V
ALUE?
-> :FFT1:MEASURE:PEAK:BASIC:DFREQUENC
Y:VALUE 1.000E+00
:FFT<x>:MEASure:PEAK[:BASic]:DV?
Function Queries all of the settings for power measurement
between peak values for FFT analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:DV?
<x> = 1 or 2 (1 only for 2-channel models)
:FFT<x>:MEASure:PEAK[:BASic]:DV:STA
Te
Function Sets or queries the on/off status of the power
measured between peak values for FFT analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:DV:STA
Te {<Boolean>}
:FFT<x>:MEASure:PEAK[:BASic]:DV:STA
Te?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:FFT1:MEASURE:PEAK:BASIC:DV:STATE ON
:FFT1:MEASURE:PEAK:BASIC:DV:STATE?
-> :FFT1:MEASURE:PEAK:BASIC:DV:
STATE 1
:FFT<x>:MEASure:PEAK[:BASic]:DV:VAL
ue?
Function Queries the power between peak values for FFT
analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:DV:VAL
ue?
<x> = 1 or 2 (1 only for 2-channel models)
Example
:FFT1:MEASURE:PEAK:BASIC:DV:VALUE?
-> :FFT1:MEASURE:PEAK:BASIC:DV:
VALUE 1.000E+00
:FFT<x>:MEASure:PEAK[:BASic]:FREQuen
cy<y>?
Function Queries all of the settings for a peak frequency for
FFT analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:FREQuenc
y<y>?
<x> = 1 or 2 (1 only for 2-channel models)
<y> = 1 or 2
:FFT<x>:MEASure:PEAK[:BASic]:FREQuen
cy<y>:STATe
Function Sets or queries the on/off status of a peak
frequency value for FFT analysis.
Syntax
:FFT<x>:MEASure:PEAK[:BASic]:FREQuenc
y<y>:STATe {<Boolean>}
:FFT<x>:MEASure:PEAK[:BASic]:FREQuenc
y<y>:STATe?
<x> = 1 or 2 (1 only for 2-channel models)
<y> = 1 or 2
Example
:FFT1:MEASURE:PEAK:BASIC:FREQUENCY1:S
TATE ON
:FFT1:MEASURE:PEAK:BASIC:FREQUENCY1:S
TATE?
-> :FFT1:MEASURE:PEAK:BASIC:FREQUENCY
1:STATE 1
5.11 FFT Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English