YOKOGAWA DLM2000 Series - Page 154

5-121
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:LOGic[:PODA]:DESKew
Function Sets or queries the deskewing of a specified logic
input pod.
Syntax
:LOGic[:PODA]:DESKew {<Time>}
:LOGic[:PODA]:DESKew?
 <Time>=−100to100ns(in10-pssteps)
Example
:LOGIC:PODA:DESKEW 1NS
:LOGIC:PODA:DESKEW?
-> :LOGIC:PODA:DESKEW1.000E−09
:LOGic[:PODA]:HYSTeresis
Function Sets or queries the hysteresis of a specified logic
input pod.
Syntax
:LOGic[:PODA]:HYSTeresis {HIGH|LOW}
:LOGic[:PODA]:HYSTeresis?
Example
:LOGIC:PODA:HYSTERESIS HIGH
:LOGIC:PODA:HYSTERESIS?
-> :LOGIC:PODA:HYSTERESIS HIGH
:LOGic:GROup?
Function Queries all logic settings.
Syntax
:LOGic:GROup?
:LOGic:GROup:BITOrder
Function Sets or queries the logic bit order.
Syntax
:LOGic:GROup:BITOrder {BIT7_BIT0|
BIT0_BIT7}
:LOGic:GROup:BITOrder?
Example
:LOGIC:GROUP:BITORDER BIT7_BIT0
:LOGIC:GROUP:BITORDER?
-> :LOGIC:GROUP:BITORDER BIT7_BIT0
:LOGic:GROup:BUNDle?
Function Queries all logic bundle settings.
Syntax
:LOGic:GROup:BUNDle?
:LOGic:GROup:BUNDle[:MODE]
Function Sets or queries the logic bundle mode.
Syntax
:LOGic:GROup:BUNDle[:MODE] {<Boolean>
}
:LOGic:GROup:BUNDle[:MODE]?
Example
:LOGIC:GROUP:BUNDLE:MODE ON
:LOGIC:GROUP:BUNDLE:MODE?
-> :LOGIC:GROUP:BUNDLE:MODE 1
:LOGic:GROup:FORMat
Function Sets or queries the logic bundle display format (bus
display).
Syntax
:LOGic:GROup:FORMat {BINary|HEXa}
:LOGic:GROup:FORMat?
Example
:LOGIC:GROUP:FORMAT BINARY
:LOGIC:GROUP:FORMAT?
-> :LOGIC:GROUP:FORMAT BINARY
:LOGic:GROup:STATe?
Function Queries all logic-input state display settings.
Syntax
:LOGic:GROup:STATe?
:LOGic:GROup:STATe:CLOCk
Function Sets or queries the reference clock waveform of
the logic-input state display.
Syntax
:LOGic:GROup:STATe:CLOCk {<NRf>|
BIT<x>}
:LOGic:GROup:STATe:CLOCk?
<NRf> = 1 to 3
<x> = 1 to 8
Example
:LOGIC:GROUP:STATE:CLOCK 1
:LOGIC:GROUP:STATE:CLOCK?
-> :LOGIC:GROUP:STATE:CLOCK 1
:LOGic:GROup:STATe:HYSTeresis
Function Sets or queries the hysteresis of the reference
clock waveform of the logic-input state display.
Syntax
:LOGic:GROup:STATe:HYSTeresis {<NRf>}
:LOGic:GROup:STATe:HYSTeresis?
<NRf> = 0.0 to 4.0 (divisions)
Example
:LOGIC:GROUP:STATE:HYSTERESIS 1.0
:LOGIC:GROUP:STATE:HYSTERESIS?
-> :LOGIC:GROUP:STATE:HYSTERESIS 1.00
0E+00
:LOGic:GROup:STATe:MODE
Function Sets or queries the on/off status of the logic-input
state display.
Syntax
:LOGic:GROup:STATe:MODE {<Boolean>}
:LOGic:GROup:STATe:MODE?
Example
:LOGIC:GROUP:STATE:MODE ON
:LOGIC:GROUP:STATE:MODE?
-> :LOGIC:GROUP:STATE:MODE 1
:LOGic:GROup:STATe:POLarity
Function Sets or queries the polarity of the reference clock
waveform of the logic-input state display.
Syntax
:LOGic:GROup:STATe:POLarity {RISE|
FALL|BOTH}
:LOGic:GROup:STATe:POLarity?
Example
:LOGIC:GROUP:STATE:POLARITY RISE
:LOGIC:GROUP:STATE:POLARITY?
-> :LOGIC:GROUP:STATE:POLARITY RISE
5.18 LOGic Group