YOKOGAWA DLM2000 Series User Manual

5-132
IM 710105-17E
:MEASure:BIT<x>:DELay:MEASure:COUNt
Function Sets or queries the count number of a source
waveform for measuring the delay between
channels of a logic waveform.
Syntax
:MEASure:BIT<x>:DELay:MEASure:COU
Nt {<NRf>}
:MEASure:BIT<x>:DELay:MEASure:COUNt?
<x> = 1 to 8
<NRf> = 1 to 10
Example
:MEASURE:BIT1:DELAY:MEASURE:COUNT 2
:MEASURE:BIT1:DELAY:MEASURE:COUNT?
-> :MEASURE:BIT1:DELAY:MEASURE:
COUNT 2
:MEASure:BIT<x>:DELay:MEASure:SLOPe
Function Sets or queries the slope of a source waveform for
measuring the delay between channels of a logic
waveform.
Syntax
:MEASure:BIT<x>:DELay:MEASure:SLO
Pe {FALL|RISE}
:MEASure:BIT<x>:DELay:MEASure:SLOPe?
<x> = 1 to 8
Example
:MEASURE:BIT1:DELAY:MEASURE:SLOPE FAL
L
:MEASURE:BIT1:DELAY:MEASURE:SLOPE?
-> :MEASURE:BIT1:DELAY:MEASURE:
SLOPE FALL
:MEASure:BIT<x>:DELay:REFerence?
Function Queries all reference waveform settings used to
measure the delay between the specified logic
waveform and the reference waveform.
Syntax
:MEASure:BIT<x>:DELay:REFerence?
<x> = 1 to 8
:MEASure:BIT<x>:DELay:REFerence:COU
Nt
Function Sets or queries the edge count of the reference
waveform used to measure the delay between
the specified logic waveform and the reference
waveform.
Syntax
:MEASure:BIT<x>:DELay:REFerence:COU
Nt {<NRf>}
:MEASure:BIT<x>:DELay:REFerence:COU
Nt?
<x> = 1 to 8
<NRf> = 1 to 10
Example
:MEASURE:BIT1:DELAY:REFERENCE:COUNT 2
:MEASURE:BIT1:DELAY:REFERENCE:COUNT?
-> :MEASURE:BIT1:DELAY:REFERENCE:COU
NT 2
:MEASure:BIT<x>:DELay:REFerence:SLO
Pe
Function Sets or queries the slope of the reference waveform
used to measure the delay between the specified
logic waveform and the reference waveform.
Syntax
:MEASure:BIT<x>:DELay:REFerence:SLO
Pe {FALL|RISE}
:MEASure:BIT<x>:DELay:REFerence:SLO
Pe?
<x> = 1 to 8
Example
:MEASURE:BIT1:DELAY:REFERENCE:SLO
PE FALL
:MEASURE:BIT1:DELAY:REFERENCE:SLOPE?
-> :MEASURE:BIT1:DELAY:REFERENCE:SLO
PE FALL
:MEASure:BIT<x>:DELay:REFerence:SOUR
ce
Function Sets or queries whether the reference point for
measuring the delay between channels of a logic
waveform will be set to the trigger point or a
waveform.
Syntax
:MEASure:BIT<x>:DELay:REFerence:SOUR
ce {TRACe|TRIGger}
:MEASure:BIT<x>:DELay:REFerence:SOUR
ce?
<x> = 1 to 8 Example :MEASURE:BIT1:D
ELAY:REFERENCE:SOURCE TRACE
:MEASURE:BIT1:DELAY:REFERENCE:SOURCE?
-> :MEASURE:BIT1:DELAY:REFERENCE:SOUR
CE TRACE
:MEASure:BIT<x>:DELay:REFerence:TRA
Ce
Function Sets or queries the reference waveform edge
used to measure the delay between the specified
logic waveform and the reference waveform.
Syntax
:MEASure:BIT<x>:DELay:REFerence:TRA
Ce {<NRf>|BIT<x>|MATH<x>}
:MEASure:BIT<x>:DELay:REFerence:TRA
Ce?
<x> of BIT<x> = 1 to 8
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:BIT1:DELAY:REFERENCE:TRACE 2
:MEASURE:BIT1:DELAY:REFERENCE:TRACE?
-> :MEASURE:BIT1:DELAY:REFERENCE:TRA
CE 2
5.20 MEASure Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English