YOKOGAWA DLM2000 Series User Manual

5-149
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SEARch:PPATtern:CLOCk:SLOPe
Function Sets or queries the clock channel slope for state
or state width searching.
Syntax
:SEARch:PPATtern:CLOCk:SLOPe {FALL|RI
SE}
:SEARch:PPATtern:CLOCk:SLOPe?
Example
:SEARCH:PPATTERN:CLOCK:SLOPE RISE
:SEARCH:PPATTERN:CLOCK:SLOPE?
-> :SEARCH:PPATTERN:CLOCK:SLOPE RISE
Description If
:SEARch:PPATtern:CLOCk:SOURce
is set to
NONE, an error occurs.
:SEARch:PPATtern:CLOCk:SOURce
Function Sets or queries the clock channel source
waveform state or state width searching.
Syntax
:SEARch:PPATtern:CLOCk:SOURce {<NRf>|
BIT<x>|NONE|MATH<x>}
:SEARch:PPATtern:CLOCk:SOURce?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of BIT<x> = 1 to 8
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:SEARCH:PPATTERN:CLOCK:SOURCE 1
:SEARCH:PPATTERN:CLOCK:SOURCE?
-> :SEARCH:PPATTERN:CLOCK:SOURCE 1
:SEARch:PPATtern:LOGic
Function Sets or queries the state or state width search
logic.
Syntax
:SEARch:PPATtern:LOGic {AND|OR}
:SEARch:PPATtern:LOGic?
Example
:SEARCH:PPATTERN:LOGIC AND
:SEARCH:PPATTERN:LOGIC?
-> :SEARCH:PPATTERN:LOGIC AND
:SEARch:PPATtern:POLarity
Function Sets or queries the state or state width search
polarity.
Syntax
:SEARch:PPATtern:POLarity {ENTer|EXIT
|FALSe|TRUE}
:SEARch:PPATtern:POLarity?
Example
:SEARCH:PPATTERN:POLARITY ENTER
:SEARCH:PPATTERN:POLARITY?
-> :SEARCH:PPATTERN:POLARITY ENTER
Description • If you specify
:SEARch:TYPE STATe
, the valid
parameter values are
{ENTer|EXIT}
.
• If you specify
:SEARch:TYPE SWIDth
, the
valid parameter values are
{FALSe|TRUE}
.
:SEARch:PPATtern:TIME<x>
Function Sets or queries the pulse width setting for state or
state width searching.
Syntax
:SEARch:PPATtern:TIME<x> {<Time>}
:SEARch:PPATtern:TIME<x>?
<x> = 1 or 2
<Time> = 1 ns to 500 s
Example
:SEARCH:PPATTERN:TIME1 1S
:SEARCH:PPATTERN:TIME1?
-> :SEARCH:PPATTERN:TIME1 1.000E+00
:SEARch:PPATtern:TYPE
Function Sets or queries the search type setting for state or
state width searching.
Syntax
:SEARch:PPATtern:TYPE {BETWeen|IN|
NOTBetween|OUT|TIMeout}
:SEARch:PPATtern:TYPE?
Example
:SEARCH:PPATTERN:TYPE BETWEEN
:SEARCH:PPATTERN:TYPE?
-> :SEARCH:PPATTERN:TYPE BETWEEN
:SEARch:QUALify?
Function Queries all edge qualified search settings.
Syntax
:SEARch:QUALify?
:SEARch:QUALify:CONDition
Function Sets or queries the edge qualified search
condition.
Syntax
:SEARch:QUALify:CONDition {FALSe|TRUE
}
:SEARch:QUALify:CONDition?
Example
:SEARCH:QUALIFY:CONDITION FALSE
:SEARCH:QUALIFY:CONDITION?
-> :SEARCH:QUALIFY:CONDITION FALSE
:SEARch:SELect?
Function Sets which detected point to display in the zoom
window and queries the zoom position of the
detected point.
Syntax
:SEARch:SELect {<NRf>|MAXimum}
:SEARch:SELect?
<NRf> = 0 to 49999
Example
:SEARCH:SELECT 1
:SEARCH:SELECT?
-> :SEARCH:SELECT 1.500+00
Description If there are no detected points, the DLM2000
returns “NAN.”
5.23 SEARch Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English