YOKOGAWA DLM2000 Series - Page 188

5-155
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:CRC
Function Sets or queries the CAN bus signal search CRC
error setting.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:
EFRame:CRC {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup:
EFRame:CRC?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:C
RC ON
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:C
RC?
-> :SERIALBUS1:CAN:SEARCH:SETUP:EFRAM
E:CRC 1
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:STUFF
Function Sets or queries the CAN bus signal search stuff
error setting.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:
EFRame:STUFF {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup:
EFRame:STUFF?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:S
TUFF ON
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:S
TUFF?
-> :SERIALBUS1:CAN:SEARCH:SETUP:EFRAM
E:STUFF 1
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]?
Function Queries all ID and data condition settings for CAN
bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:
SETup[:IDData]?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK?
Function Queries all ACK settings for the ID and data
conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:
SETup[:IDData]:ACK?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:MODE
Function Sets or queries the ACK mode, which is one of
the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:ACK:MODE {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:ACK:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:A
CK:MODE ON
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:A
CK:MODE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:ACK:MODE 1
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:TYPE
Function Sets or queries the ACK condition, which is one
of the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:ACK:TYPE {ACK|ACKBoth|NONack}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:ACK:TYPE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:A
CK:TYPE ACK
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:A
CK:TYPE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:ACK:TYPE ACK
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA?
Function Queries all data settings for the ID and data
conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:CONDition
Function Sets or queries the comparison condition, which
is one of the ID and data conditions, for CAN bus
signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:CONDition {BETWeen|EQUal|FALS
e|GREater|LESS|NOTBetween|NOTEqul|TR
UE}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:CONDITION BETWEEN
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:CONDITION?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:DATA:CONDITION BETWEEN
5.24 SERialbus Group