YOKOGAWA DLM2000 Series User Manual

5-158
IM 710105-17E
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:PATTern
Function Sets or queries the ID pattern, which is one of
the ID and data conditions, for CAN bus signal
searching in binary notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:PATTern {<String>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:PATTern?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:PATTERN "11100001111"
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:PATTERN?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:IDENTIFIER:PATTERN "11100001111"
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:PFORmat
Function Sets or queries the ID input format, which is one
of the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:PFORmat {BINary|HEXa|ME
SSage}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:PFORMAT BINARY
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:PFORMAT?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:IDENTIFIER:PFORMAT BINARY
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal?
Function Queries all message and signal settings for the ID
and data conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:MESSage:ITEM
Function Sets the message item, which is one of the ID and
data conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:MESSage:ITEM {<String>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:M
SIGNAL:MESSAGE:ITEM "TEST"
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SELect
Function Sets or queries the message and signal condition,
which is one of the ID and data conditions, for
CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:SELect {MESSage|SIGNal}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:SELect?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:M
SIGNAL:SELECT MESSAGE
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:M
SIGNAL:SELECT?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:MSIGNAL:SELECT MESSAGE
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal?
Function Queries all signal settings for the ID and data
conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:SIGNal?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:CONDition
Function Sets or queries the signal data condition, which
is one of the ID and data conditions, for CAN bus
signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:SIGNal:CONDition {BETWeen
|EQUal|GREater|LESS|NOTBetween|NOTEq
ul}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:SIGNal:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:M
SIGNAL:SIGNAL:CONDITION BETWEEN
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:M
SIGNAL:SIGNAL:CONDITION?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:MSIGNAL:SIGNAL:CONDITION BETWEEN
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English