YOKOGAWA DLM2000 Series User Manual

5-159
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:DECimal<y>
Function Sets a signal’s reference value, which is one of
the ID and data conditions, for CAN bus signal
searching in decimal notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:SIGNal:DECimal<y> {<NRf>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:MSIGnal:SIGNal:DECimal<y>?
<x> = 1 to 4
<y> = 1 or 2
<NRf> = See the DLM2000 Features Guide for
this information.
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:M
SIGNAL:SIGNAL:DECIMAL1 1
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:M
SIGNAL:SIGNAL:DECIMAL1?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:MSIGNAL:SIGNAL:DECIMAL1 1.000E+00
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:ITEM
Function Sets the signal item, which is one of the ID and
data conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:ITEM {<String>,<St
ring>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
MSIGNAL:SIGNAL:ITEM "Sig_Test","Mess_
Test"
Description Set the signal item first and then the message
item.
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:RTR
Function Sets or queries the RTR value, which is one of
the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:RTR {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:RTR?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:R
TR ON
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:R
TR?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:RTR 1
:SERialbus<x>:CAN:SEARch:SETup:MODE
Function Sets or queries the CAN bus signal search mode
setting.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:MO
DE {EFRame|IDData|SOF}
:SERialbus<x>:CAN:SEARch:SETup:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:MODE EFR
AME
:SERIALBUS1:CAN:SEARCH:SETUP:MODE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:
MODE EFRAME
:SERialbus<x>:CANFD?
Function Queries all CAN FD bus signal settings.
Function
:SERialbus<x>:CANFD?
<x> = 1 to 4
:SERialbus<x>:CANFD:ANALyze?
Function Queries all CAN FD bus signal analysis settings.
Syntax
:SERialbus<x>:CANFD:ANALyze?
<x> = 1 to 4
:SERialbus<x>:CANFD[:ANALyze]:SETup?
Function Queries all CAN FD bus signal analysis bus
settings.
Syntax
:SERialbus<x>:CANFD[:ANALyze]:SETup?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:ANALYZE:SETUP?
-> :SERIALBUS1:CANFD:ANALYZE:SETUP
:SERialbus<x>:CANFD[:ANALyze]:SETup:
BRATe
Function Sets or queries the CAN FD bus signal analysis
bit rate (data transfer rate).
Syntax
:SERialbus<x>:CANFD[:ANALyze]:SETup:B
RATe {<NRf>|USER,<NRf>}
:SERialbus<x>:CANFD[:ANALyze]:SETup:B
RATe?
<x> = 1 to 4
<NRf> = 250000, 500000, 1000000
USER <NRf> = 20000 to 1000000 (resolution:100)
Example
:SERIALBUS1:CANFD:ANALYZE:SETUP:BRA
TE 1000000
:SERIALBUS1:CANFD:ANALYZE:SETUP:BRA
TE?
-> :SERIALBUS1:CANFD:ANALYZE:SETUP:BR
ATE 1000000
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English