YOKOGAWA DLM2000 Series - Page 190

5-157
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:PATTern<y>
Function Sets or queries the data value, which is one of
the ID and data conditions, for CAN bus signal
searching in binary notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:PATTern<y> {<String>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:PATTern<y>?
<x> = 1 to 4
<y> = 1 to 8
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:PATTERN1 "00110101"
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:PATTERN1?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:DATA:PATTERN1 "00110101"
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:PFORmat
Function Sets or queries the data input format, which is one
of the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:PFORmat {BINary|HEXa}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:PFORMAT BINARY
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:PFORMAT?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:DATA:PFORMAT BINARY
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:SIGN
Function Sets or queries whether signed or unsigned data
format will be used, which is one of the ID and
data conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:SIGN {SIGN|UNSign}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:DATA:SIGN?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:SIGN SIGN
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:D
ATA:SIGN?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:DATA:SIGN SIGN
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier?
Function Queries all identifier settings for the ID and data
conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:HEXa
Function Sets the ID value, which is one of the ID and
data conditions, for CAN bus signal searching in
hexadecimal notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:HEXa {<String>}
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:HEXA "1AB"
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:MFORmat
Function Sets or queries the ID frame format (standard
or extended), which is one of the ID and data
conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:MFORmat {EXTended|STANd
ard}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:MFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:MFORMAT EXTENDED
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:MFORMAT?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:IDENTIFIER:MFORMAT EXTENDED
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:MODE
Function Sets or queries the ID enable/disable condition,
which is one of the ID and data conditions, for
CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:MODE {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDat
a]:IDENtifier:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:MODE ON
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:I
DENTIFIER:MODE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDAT
A:IDENTIFIER:MODE 1
5.24 SERialbus Group