YOKOGAWA DLM2000 Series User Manual

5-169
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:FLEXray[:ANALyze]:SETu
p:SPOint
Function Sets or queries the FLEXRAY bus signal sample
point.
Syntax
:SERialbus<x>:FLEXray[:ANALyze]:
SETup:SPOint {<NRf>}
:SERialbus<x>:FLEXray[:ANALyze]:
SETup:SPOint?
<x> = 1 to 4
<NRf> = 4, 5, or 6
Example
:SERIALBUS1:FLEXRAY:ANALYZE:SETUP:SPO
INT 5
:SERIALBUS1:FLEXRAY:ANALYZE:SETUP:SPO
INT?
-> :SERIALBUS1:FLEXRAY:ANALYZE:SETUP:
SPOINT 5
:SERialbus<x>:FLEXray:DETail?
Function Queries all FLEXRAY bus signal analysis result
list settings.
Syntax
:SERialbus<x>:FLEXray:DETail?
<x> = 1 to 4
:SERialbus<x>:FLEXray:DETail:DISPlay
Function Sets or queries the display mode for the FLEXRAY
bus signal analysis result list.
Syntax
:SERialbus<x>:FLEXray:DETail:DISPl
ay {FULL|LOWer|UPPer}
:SERialbus<x>:FLEXray:DETail:DISPlay?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:DETAIL:DISPL
AY FULL
:SERIALBUS1:FLEXRAY:DETAIL:DISPLAY?
-> :SERIALBUS1:FLEXRAY:DETAIL:DISPL
AY FULL
:SERialbus<x>:FLEXray:DETail:LIST:IT
EM?
Function Queries all items that will be displayed in the
FLEXRAY bus signal analysis result list.
Syntax
:SERialbus<x>:FLEXray:DETail:LIST:IT
EM?
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:DETAIL:LIST:ITEM?
-> :SERIALBUS1:FLEXRAY:DETAIL:LIST:IT
EM "No.,Time(ms),S/D,IND,ID,Len,CC,Da
ta,Information,"
:SERialbus<x>:FLEXray:DETail:LIST:VA
Lue?
Function Queries all of the data for the specified analysis
number in the FLEXRAY bus signal analysis result
list.
Syntax
:SERialbus<x>:FLEXray:DETail:LIST:VAL
ue? {<NRf>|MAXimum|MINimum}
<x> = 1 to 4
<NRf> = See the DLM2000 Features Guide for
this information.
Example
:SERIALBUS1:FLEXRAY:DETAIL:LIST:VAL
UE? 0
-> :SERIALBUS1:FLEXRAY:DETAIL:LIST:V
ALUE"0,−0.0001968,S,1111,4,
4, 2,01 02 03 04 05 06 07 08,,"
:SERialbus<x>:FLEXray:SEARch?
Function Queries all FLEXRAY bus signal search settings.
Syntax
:SERialbus<x>:FLEXray:SEARch?
<x> = 1 to 4
:SERialbus<x>:FLEXray:SEARch:ABORt
Function Aborts the FLEXRAY bus signal search.
Syntax
:SERialbus<x>:FLEXray:SEARch:ABORt
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:ABORT
:SERialbus<x>:FLEXray:SEARch:EXECute
Function Executes a FLEXRAY bus signal search.
Syntax
:SERialbus<x>:FLEXray:SEARch:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:EXECUTE
:SERialbus<x>:FLEXray:SEARch:FJUMp:C
COunt
Function Jumps to the cycle-count field in the FLEXRAY
bus signal analysis results.
Syntax
:SERialbus<x>:FLEXray:SEARch:FJUMp:CC
Ount
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:FJUMP:CCOU
NT
:SERialbus<x>:FLEXray:SEARch:FJUMp:C
RC
Function Jumps to the CRC Field in the FLEXRAY bus
signal analysis results.
Syntax
:SERialbus<x>:FLEXray:SEARch:FJUMp:C
RC
<x> = 1 to 4
Example
:SERIALBUS1:FLEXRAY:SEARCH:FJUMP:CRC
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English